Lidl Parkside shop vacs are back...

[Rorschach]

The dust deputy deluxe kit then?

Sounds about right. I had planned to get one of the cheap ebay clones however because I didn't have suitable buckets or hose lying around I wasn't saving as much by the time I got all the bits together. The kit they sell is fairly good value and fits together nicely.

 

[Mutley Racers]

The dust deputy deluxe kit then?

Sounds about right. I had planned to get one of the cheap ebay clones however because I didn't have suitable buckets or hose lying around I wasn't saving as much by the time I got all the bits together. The kit they sell is fairly good value and fits together nicely.

Thanks mate

 

[Chris152]

In case anyone's interested, this
https://www.cleva-uk.com/hepa-cartridge-filter-951316
fits the 30L Lidl wet/ dry vac. No idea if the rest of the vac is up to the same, but it should stop those really small particles getting pumped back into the room through the exhaust?

 

[MikeJhn]

Far cheaper to get hold of a Numatic HEPA filter bag slit it open and put it over your container between the container and the standard filter this will then pre filter any dust, you can do this with any dustbin type vacuum, doing this with my Neumatic and a bag fitted it has four filters prior to the exhaust.

Mike

 

[Chris152]

Thanks Mike - do you tape it around the standard filter just below where it joins the lid? I bought the HEPA filter so this'll be for next time.

 

[MikeJhn]

No I just put it over the top of the canister and then fit the lid on top, there is a very big Numatic HEPA 4BH bag available, got the idea from the Axminster NVD750 manual: http://www.axminster.co.uk/media/downlo ... manual.pdf page 7.

Mike

 

[Chris152]

No I just put it over the top of the canister and then fit the lid on top, there is a very big Numatic HEPA 4BH bag available, got the idea from the Axminster NVD750 manual: http://www.axminster.co.uk/media/downlo ... manual.pdf page 7.

Mike

Ahhh, got you! That's pretty simple, great idea. Thank you!