Forum users' Table saws
- Thread starter CYC
- Start date
Help Support UKworkshop.co.uk:
JustBen
Established Member
Startrite 175 (I think)
shedfurniture
Member
- Joined
- 25 Jul 2013
- Messages
- 6
- Reaction score
- 0
Hi all,
I have the Bosch GTS 10 XC Table Saw . Does it count?
Regards
Giuseppe
I have the Bosch GTS 10 XC Table Saw . Does it count?
Regards
Giuseppe
woodwoodjohn
Established Member
axminsterP/30 panel saw with sliding table
longinthetooth
Established Member
- Joined
- 15 May 2013
- Messages
- 183
- Reaction score
- 1
I've never had a table saw, which I believe to be an American invention. I have owned in turn a Startrite and a Luna circular saw bench, though. This is UKWorkshop! Let's keep the terminology British! Otherwise every a*se will become an ass.
david123
Established Member
AXI TS-200 with sliding carriage.
CaptainBarnacles
Established Member
Kity 619 with extensions and sliding table.
PeteG
Established Member
Axminster TS-200 with side extention, and I'm really chuffed 
John15
Established Member
Mine's an AW10BSB2
John
John
Zeddedhed
Established Member
Wadkin Bursgreen AGS 10"
paulpowell
Member
Hi guys this is my first post on this site, in fact first post on any forum I have read a few posts and I have to say, speaking as a carpenter there seems to be a shed load of experience and good advive given here.
Im not sure if this is the right place to post this, but Im sure I will find out the drills shortly.
I have an erbauer table saw, which has worked fine up untill a few days ago when it started to make a noise. I took it apart and noticed that the splines at the end of the armeture shaft had been stripped. Now I am aware through reading some of the posts, that parts are not available for this saw, however this part appears to look like a pretty standard 10 tooth gear.
I did read on another forum that one member had managed to get his motor for the same saw repaired. I would like to knowe if anyone can suggest a repair company, or at least a place I can buy the part.
Even though this is a low end brand, the saw is in great shape and does a lovley cut, so I am reluctant to throw it, as some posts have suggested. I am the type of person who doent like to be beat, and I am sure this can be repaired.
So please if anyone has any suggestions I would be really greatfull, I hate being without a table saw, everything seems so much hard work without one.
Many thanks guys
I have read a few posts and I have to say, speaking as a carpenter there seems to be a shed load of experience and good advive given here.Im not sure if this is the right place to post this, but Im sure I will find out the drills shortly.
I have an erbauer table saw, which has worked fine up untill a few days ago when it started to make a noise. I took it apart and noticed that the splines at the end of the armeture shaft had been stripped. Now I am aware through reading some of the posts, that parts are not available for this saw, however this part appears to look like a pretty standard 10 tooth gear.
I did read on another forum that one member had managed to get his motor for the same saw repaired. I would like to knowe if anyone can suggest a repair company, or at least a place I can buy the part.
Even though this is a low end brand, the saw is in great shape and does a lovley cut, so I am reluctant to throw it, as some posts have suggested. I am the type of person who doent like to be beat, and I am sure this can be repaired.
So please if anyone has any suggestions I would be really greatfull, I hate being without a table saw, everything seems so much hard work without one.
Many thanks guys
