Dabop

Cries... We got the Southern Lights happening here in Australia (with people seeing them as far north as Mackay in central Queensland)...

Likely to see them during the entire weekend if you are lucky to be in an area where they can be seen...

Dabop (above) opens the door to fresh thinking. If you treat the short support tubes as spacers so the work is done by the through...

Annular cutters or even hole saws will readily cut tubing, but for such small diameter stuff, simply rough cutting a V with a grinder...

I also did this and found that the hinges clashed so I had to install the hinges for the door outside the fridge door, pictures: Top...

That is indeed why the sliders- the hinges don't have to align at all... Hope this kinda makes sense... Doors closed Fridge is blue...

It may be elderly, but it is the same as every other Chinese drill press sold over the last 25 years. See, for example, this current...

One of the 'suggested links' on your link showed this was the way they did it... Uses standard butt hinges on the cupboard door, and...

It is bad form to quote myself, I know. It struck me overnight that this could be adapted to tubular material. Drill 4mm clearance...

I use the Australian wire sizing calculator for our AS 3000 standards, which is pretty good for sizing the cable sizes required (the BS...

It might just be one extra socket but often it is just that extra one that causes failure especially if you have no detailed info on the...

In my past life as a Sparky, had a call to a "garage" shop, where the guy had a CU with spare ways, did the same as this proposal jammed...

This is a problem with electrical work, it might function but could also be lethal when a fault occurs wheras with plumbing you are...

The first mistake here is talking about a cable size but no mention of length, the current carrying capacity of a cable is not just...

12 point sockets can roundoff a square nut or plumbing plug if a lot of force is needed. I still have 4 point, 8 point and weather head...