Forum users' Table saws

[HowardM]

Sheppach 4020,
Sliding Table,
Folding Extension,
Scribing Blade.

Like a Hot knife through butter.

HowardM

 

[DangerousDave]

Ryobi ETS1825. Spent ages tuning it, got a decent blade, its now actually pretty accurate :shock:

 

[bluezephyr]

Record/Startrite/Rojek TS300

Its says Record sheffield, Looks the same as a Startrite, But has a Rojek plate on it!

Compared to the TSP250 its a huge jump up, It took a fire to change it, But im strangely glad it had a dodgy capacitor now!.

 

[brianhabby]

Finally I can add my saw.

Sip 01332 10" with cast iron table courtesy of Slim.

My other saw is a small NuTool one and not really worthy of mention on this site :lol:

The difference is like chalk & cheese.

regards

Brian

 

[johnf]

Hammer c331 combi with 2 metre slider

 

[Streepips]

Fox F36-540..........10" cast iron table, steel sliding bed. 3m X3m footprint so not a little one..and a Scheppach TS2500 for smaller work

 

[Fred01]

It's up and running so I can officially state that I have and am using a Wadkin AGS 12".

 

[Ironballs]

Well after lots of casting about and search ont'net and deciding if current budget stretched to a Fox 10", I managed to locate a used but in great nick Kity 619 for a good price.

So from Tuesday it's bye bye 10" Perform no guard death machine and hello sliding carriage heaven. I just have to go to Cheltenham to pick it up. pipper

 

[maltrout512]

Axminster AW12BSB2 = 1

Bought one week ago and it's a real corcker. Now all set up and working for it's keep.

 

[andypo]

Xcalibur 10" 806

Love it

 

[jhwbigley]

Startrite, TA175

its what you call a saw

 

[filsgreen]

Axi TS200 arrived Saturday, just got to put it together

 

[True Grit]

I have a Rexon BT2502AE

 

[markwuzere]

scheppach tku with sliding carriage and panel cutting extension and a really old tyzac 10" cast iron saw model unknown

 

[TrimTheKing]

Fox F36-530 10" with sliding table etc. Very happy with it, once I put a decent blade in. Table came set spot on to the blade so nice square cuts from the off.

Cheers

Mark

 

[katellwood]

Felder BF5 combi and a Wadkin AGS 10"

 

[Richard S]

Jet Supersaw with US 5/8" arbor and a Tilgear cast iron router table in the extension wing.

 

[RinkyDinky]

Dewalt DW746 with extension tables.

 

[CroppyBoy1798]

A Makita MLT100, nice bit of kit, very happy with it thus far

As above, minus the folding stand.

 

[white_sw]

My very first table saw... SIP 1332. Just won it today on eBay for a pretty good price. £235 with my 10% eBay discount voucher.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0292135175

Hopefully picking it up at the weekend.

Cheers,
Sam