Search results

My copy of application 'starry night enthusiast' confirms its venus.

I agree with all of davy_owen_88 advice and recommend it. However the master kill switch is a optional extra so fit if you need it there can be a master switch in the cu any way.

Does the window have a trickle vent, warm damp air you are producing can vent and dryer air will replace it , double glassing also helps the glass being at a higher temperature not at the due point but ventilation is the most effective.

http://www.henryvenables.com/

I have used a similar cement based product by eternit click my www button. I used a home made jig with a small angle grinder with aldi diamond blade to cut it and hardwood for corners and window surrounds. Construction plaster bd.vapour barrier, studs with insulation full depth,sheathing ply...

From your original post there is only one place to look the DICK cat.

Glue sheets together do not fit tight to walls to stop bowing, fix with good annular nails and screw near to doorways .Consider insulating between joists.

What i did last time was fit sim from old into new save into phone memory then fit new sim which may have greater capacity then save to new sim you can then choose to save to memory and/or sim

I have been suprised how much i use air in the workshop and would not want to give it up .

We got a philips for the good picture works well slight noise when loading disc then ok .The sound is ok but best with headphones.

'Then!! when I came to remove the screw thread (to remove the lance) I got one **** of a belt from it.' Has anyone any Idea as to why the machine is live? Its live because the power has come into contact with the metal work this should normally be earthed and cause the power to trip out...

Yes . the jet with legs was cheaper the latest is fully panelled its a good table saw and i do not think you will have to move it very far to use the table.

Buying tools is addictive you were thinking of spending £770 you could have the table saw for £610 leaving £160 and a triton table towards your initial choice of bandsaw (£260) and no more sawing issues.

The sawn surface from a bandsaw needs quite a lot of smoothing out and they are useful for deep cuts and curved work . Have you considered a table saw you will get a good cut surface and the table aids work on long timbers the AW 10BSB2 just got a good review on this forum.

There is only one way to deal with poor quality send it back for a full refund it costs the company money and they will sort the problem in time and this will provide you with a opportunity to solve your requirement a different way addressing any vibration problems etc .

Wood and water not a good combination for life of the wood. So i go for concrete base with poly dpc under and chip board floating over and a studding construction set and bolted with more dpc to the edge of the base so the cladding goes past the junction and keeps out the water the rest of the...

I have been through this and i recommend pcl much more robust its easy to sort out as both types use 1/4 bsp threads so you can choose the fittings you need from diagrams etc.

I have the opposite opinion to lord nibbo using the axminster nailer with manual oiling i got a lot of jams but after the auto oiler very few indeed and toolstation oil is cheaper.

So its like the circular beds at the sewage works with a static water delivery, new stone should have it good as new and the action will build up over time should be trouble free for a number of years.

I have a filter system for my pond fish which after the initial filtering allows the water to flow over a multi tubular media which is designed to have a large surface area in a relatively small space the water flows over/through this and bacteria clinging to it cleans it up . This seems to be...