Search results

Found this on net you may need to uprate for extra weight. http://benchmark.20m.com/tools/Unisaw/UnisawMobileBase/MobileBaseDesignGuide.pdf

A problem i have had is when loading the m/c for the first time almost all of the weight is applied to just 2 of the castors which means you have to buy high rated items lots manufacture them .If you had say a hard wood frame or steel, plus the castor its quite a lift up ,what is the max you can...

I only have a 2005 price 2400x1200x50 £13.80 lots of different thickness available from 'buildbase'. I used a thin flexible dowel flush pull cut saw for its small kerf to make any cuts.

I have used springvale floorshield over a concrete base. http://www.springvale.com/products.asp?InfoID=521&mySub=516 Then 18mm flooring over that it made a good floor might save some money as you seem to be getting some big bills.

Condenser you can prove by spinning by hand ( not always easy practically)then switching on while still spinning and it will run. Yes its easy wire for wire.

I have and use regularly a Startrite Mercury pillar drill exactly the same as the one pictured. There is no play in the quill and feels a precision machine i recommend it for wood work.

What are you going to extract, planer thicknesers and spindle molders need 100mm pipe . I have the SIP extractor external to garage and set up not to capture the very fine dust this gives max suck .100mm steel duct and a blast gate at each outlet then flex tube to m/cs it works fine for me.Fine...

There was a stove for sale on woodwork uk . com I have a similar type but the smallest, it works fine at first you are looking at it regularly but you get use to setting the air controls, burns every thing does not go out easily.

Join through the switch to check that first .

My understanding is the spirit of the regs. is that diy could alter the design and protection and make it worse/dangerous. But maintenance that is like for like replacement is fine. So i would check its installed to the correct standard ,protection etc and replace like for like the like being...

Is the ipod switched on.

If i thickness softwood with no extraction on my m/c the chips can get under the roller and dent the surface.But like you have found out s/h woodwork m/c's get good prices.

To pull the shaft you need to find a way its nut can be used to pull it out of the main casting, a very large socket and some washers or a length of flat bar with a hole for the thread with solid spacers from it to main casting and wind it out . When replacing use the thread at the other end to...

benefit of a disc sander ? great for sharpening a pencil . can remove stock quite fast obviously external curved work end grain smoothing just a machine you use most visits to the shop especially when making jigs and small parts, final fitting ,safe edges etc

Have a look on ebay i have one its very good but takes up space. I do not think it stops in 10 seconds but that does not bother me quite a good price. FOX DOUBLE DISC SANDER F31-122 240V

The clapper board with 123 K-LITE is the way to go .I have the same set up with vista home but you need to make the computer use it, so right click and go open with and/or always open this type of file with, or choose default.

I have had two problems on one of there band saws, fence not locking and capacitor u/s. both dealt with over the phone and parts sent foc under warranty saw was 4 years old.

Definition: Voice over Internet Protocol, or VoIP, is the technology used to transmit voice conversations over an internal or external data network using IP packets (digital form); without loss in functionality, reliability or quality; and in compliance with the International Telecommunications...

A metal welded up structure along the rear edge of each shelf and between shelfs the black part covers the main structure and fixings also the shelves are routed to cover there strengtheners.Thats my guess.

The picture above is quite old taken at the end of construction of a extension to the shop but with most of the tools moved back in . The table saw is next door in the garage and has to be moved to garage the car.