Tins of Filler Not full

[stuart little]

Sometime back there were discussions on the subject. It's a simple reason, as it only applies to 2-pack filler, the deep lid is solely for storage of the hardener. Measure the depth of lid, then the distance from the level of filler to the lip of the tin, one will then find that there is about a 5mm space below the lid. There is no con.

 

[Phil Pascoe]

We know that, but the level of filler is still way down the tin. I've yet to find one that comes within an inch. This one's two inches down from the top, the lid is 3/4" deep.

 

[stuart little]

Not the Everbuild one I have, only about 5mm, as I said.