The EZ Story

[davegw]

(after all last year 6000 people had fatal accidents involving curtains !!)

Bloody Nora! :shock: There was only 3500 deaths on the roads!

There you go - Never Drive Curtains! or should that be cover your windows with Cars?

 

[ike]

Dino,

For what its worth my view is, in the grand scheme of things you can't please everyone all the time. 99.99% of woodworkers wouldn't take issue with you, your company or the product.

You sound like a straight, knowledgable guy with the guts and conviction to bring your ideas to the market. I'm not in the market for a rail system at the moment, but if I ever am, i'll check it out.

I for one wish you good luck and prosperity.

cheers,

Ike

 

[tnimble]

Thanks wizer for your post. I did not know of this rails system. I wishd I knew this a few weeks back, when my bosch rails (initially bought for a routing job) + bosch c saw (which does not fit the rails, but does with a hard to obtain and flimsy adapter) caused me a splitting head ache.

Instead of buying more rail to get to the length I needed, spending a weeks worth of evenings in building my own circsaw to rails adapter which does not flex and buying a fine toothed blade to replace the factory fitted blade with cracked welds (only used about twice to cut some ply and sat years in its box) and which lacks the blade expansion relief cuts :shock: I would have seriously considered the EZ system together with a new saw. I don't have a table saw nor the room for one. The makita, dw, festools rails, etc have (for sawing) little use for me. This system however (espcially due to the square and bridge) does. And would together with the BCT Jointmaker Pro which I'm hoping to have delivered on schedule before the holyday season solve all my sawing challenges.


About how Dino is involved in his product or advertises it (depending on how you look at it), I don't take any offence in that. If I'm correct Dino is from Greece. I know another entrepreneur from Greece and one from Turkey who are very alike how I perceive Dino. They're extremely enthusiastic, involved and passionate in their ideas and product. So what if in a post or a video, to illustrate something, a comparison is made by a claim that very most likely doesn't match the actual statistics at all. Is a claim from the heart, within the extreme enthusiasm the claim is true. Probably all down to a collision between 'hot head' and 'cold fish'.

 

[YCF Dino]

Dino,

For what its worth my view is, in the grand scheme of things you can't please everyone all the time. 99.99% of woodworkers wouldn't take issue with you, your company or the product.

You sound like a straight, knowledgable guy with the guts and conviction to bring your ideas to the market. I'm not in the market for a rail system at the moment, but if I ever am, i'll check it out.

I for one wish you good luck and prosperity.

cheers,

Ike

Thanks Ike.
I think, I owe to my UK friends and customers a visit.
A small trade show?

Thanks guys.
I will try to attent a small Uk trade show and cut wood instead of words.
( I don't like the associated pressure of the large shows)

Any ideas and suggestions are welcomed. :wink:

 

[xraymtb]

Bring plenty products with you!!! Save us the postage. :wink:

 

[YCF Dino]

Bring plenty products with you!!! Save us the postage. :wink:

Mike,
We're looking to have the ez made in UK.
Our Uk market is very strong even with the postage.

Thanks.