Hegner on FB - worth it?

[nickh]

Hegner Single Speed

I'm sure you're all sick of these questions! I am a complete beginner but having read the stickies I see the Hegner name mentioned quite a bit. There's one for sale on FB about an hour away from me (linked above). However, it doesn't look to be in great condition and has a broken switch.

All I really need a saw for is splitting pen blanks and make fine cuts to insert 0.6mm steel into.

Is it worth considering the one linked above or am I better getting a new, cheaper saw with good blades?

 

[MintSauce]

Hegner Single Speed

I'm sure you're all sick of these questions! I am a complete beginner but having read the stickies I see the Hegner name mentioned quite a bit. There's one for sale on FB about an hour away from me (linked above). However, it doesn't look to be in great condition and has a broken switch.

All I really need a saw for is splitting pen blanks and make fine cuts to insert 0.6mm steel into.

Is it worth considering the one linked above or am I better getting a new, cheaper saw with good blades?

I would go and have a look at it. It looks to be an earlier model than mine (different table design). If it runs smoothly then it could be worth it.

As for the switch not working I can give two suggestions:

1. Buy a foot pedal to switch the scroll saw on and off. The switch on the scroll saw would need to be switched on anyway. It’s on my list of things to add as it will allow me to turn the scroll saw on and off while keeping both hands on the workpiece.
Like this:

https://www.ebay.co.uk/itm/19609428...ar=496305299749&widget_ver=artemis&media=COPY

2. I am aware from his website that @scrimper says he replaced the switch on his Hegner for not a lot of money. He may be able to provide further information on this.

https://sites.google.com/view/scrimpers-fretworking-site/fretsaws/hegner-saws

 

[nickh]

I would go and have a look at it. It looks to be an earlier model than mine (different table design). If it runs smoothly then it could be worth it.

As for the switch not working I can give two suggestions:

1. Buy a foot pedal to switch the scroll saw on and off. The switch on the scroll saw would need to be switched on anyway. It’s on my list of things to add as it will allow me to turn the scroll saw on and off while keeping both hands on the workpiece.
Like this:

https://www.ebay.co.uk/itm/19609428...ar=496305299749&widget_ver=artemis&media=COPY

2. I am aware from his website that @scrimper says he replaced the switch on his Hegner for not a lot of money. He may be able to provide further information on this.

https://sites.google.com/view/scrimpers-fretworking-site/fretsaws/hegner-saws

Thank you for all the information - much appreciated. The foot switch is a great idea. If I can get a decent second hand machine for the same price I'd pay for a new cheap machine I'd rather go for a good SH one.