Forum users' Table saws

[NewtoWood]

Axi TS-200, very pleased with it excellent features for the money

 

[zambezi]

SIP 01332 10" that I bought second hand, bad condition, in the process of refurbing and can't use it yet.

 

[slemishwoodcrafts]

sip 01332 10" bought second hand, can't fault it. superb machine and incredibly accurate

regards

michael

 

[dessoman]

DEFT T50
DEWALT DW745

 

[adzm124]

Possibly a bit late, but a felder hammer b3

 

[fantaglub]

Harvey HW110LG-30 (same as lyndhurst T30 with a different fence)

 

[Blister]

Delta 10" Left Tilt CONTRACTOR'S SAW

with a

30" BIESEMEYER® Fence System and Table Board

on a dual mobile base :mrgreen:

 

[BHENRY1]

A Deft T30 with a Jessem MiteRslide and a Festool C50 Precisio with all the trimmings for on site work.

 

[smparry]

Trition Workcentre 2000 with Hitachi 9" Circular Saw slung underneath

 

[Schummie]

A Deft T30 from Lyndhurst with a Osborne EB-3 Miter Guide.

(with self made fence faces)

Success Schummie.

 

[fatthumb]

Deft T30

 

[Joiner]

SIP 10" with sliding table.

 

[chippy mark]

I have an Axminster TS200 recently bought on ebay

 

[kenf]

I have had a SIP 01332 10" for a year now and I am totally happy with it.

I have recently prepared an updated results of the survey to date on a spread sheet but do not know how to get this into the thread. Those details include my saw.

See my separate posting on Site Queries section.

 

[9fingers]

Ken,

You might be able to cut and paste the excel into a thread like this one

BA bolt details

BA no Pitch diam mm diam in head mm head in
0 1.00 6.00 0.236 10.50 0.413
1 0.90 5.29 0.208 9.25 0.364
2 0.81 4.66 0.183 8.15 0.321
3 0.73 4.11 0.162 7.19 0.283
4 0.66 3.62 0.142 6.33 0.249
5 0.59 3.19 0.126 5.58 0.220
6 0.53 2.81 0.111 4.92 0.194
7 0.48 2.48 0.097 4.33 0.171
8 0.43 2.18 0.086 3.82 0.150
9 0.39 1.92 0.076 3.37 0.132
10 0.35 1.69 0.067 2.97 0.117


But the excel formatting goes to pot sadly and it strips out any excel table features.

Otherwise I can host it for you on my FTP site and give you a link to it if you like.
PM me to sort out details.

Bob

 

[Tim Nott]

My TS is part of a Robland combi - nice and solid cast iron with a sliding table for crosscuts. The fence leaves a lot to be desired...

 

[kenf]

Thanks Bob, but as I hoped Charley Admin has stepped in and I have now sent him the spread sheet for incorporation somehow.

 

[jimturn]

My apologies if this thread is no longer active, but my TS is a trusty old Wadkin AGS10.

Regards to everyone. Jim.

 

[footinturf]

I have a Lazzari Tema 3200. Sliding arm straight as a die. Great saw

 

[toolsjason1]

Hi
Can anyone provide a manual or wiring diagram for this bench saw please by email?

[email protected]

Much appreciated