Forum users' Table saws

[heimlaga]

Stenberg KEV 600 combination machine manufactured in 1957.

Electra Beckum site saw manufactured in the 1980-ies.

Chemnitzer Werkzeugmaschinenfabrik 24" cirkular rip saw manufactured in 1885. Not yet in use waiting for the electrician to wire it up.

A home built site saw from the 1960-ies. In storage and never used anymore.

 

[Hot stuff]

Just bought a Jet 250CS yesterday, an oldie but in great condition other than the cabinet paint work. I had a hand to load it onto the trailer to take it home but had to dismantle it to take it off as I was on my ownsome. Perfect opportunity to repaint before I re-assemble it and set it up.
It's a monster compared to the cheapie I've been using and I'm really looking forward to trying it out.

 

[MikeJhn]

Axminster TS250-2: axminster-ts250-2-modifications-t102284.html and I know of at least three others on here, the thread has over 1750 hits so must be popular.

Sold on the Triton workcentre so cross one off and add the Axminster.

Mike

Now over 6000 hits, proves its popularity.

as of 15/12/17 now over 11,000 hits.

Mike

 

[HappyHacker]

Hammer B3 with spindle

 

[rlukey]

Charnwood W619

 

[lachlan]

Dirty Pro Tools™ Table Saw 8” Blade With Sliding Side Extension 240v.

 

[kevinlightfoot]

Sedgwick TA 315 single phase

 

[OscarG]

DeWalt 7491

Not had it long but love the quality of it.

 

[Paul200]

Triton 2000 :-(

 

[MikeK]

Minimax SC2 Classic

Is anyone updating the first post in this thread to account for the entire 630 posts so far? The OP hasn't visited the site in over three years and the first post appears to have not been edited in over ten years.

 

[johnt64]

Charnwood W619

 

[peter-harrison]

Wadkin AGS/P

 

[Clwydianrange]

Axminster ts250

 

[sneggysteve]

Bosch, GTS 10

 

[mrpercysnodgrass]

Startrite 275

 

[colonel-cueball]

Clarke CTS10C (old but it was free)

 

[delboy47]

Scheppach TS2500

 

[Westwood]

Only just seen this thread so coming to it late.
I recently bought at auction, a SIP 1332 10 inch model but it needs some tlc and a few key new parts. Fence, front and back rails, riving knife and blade guard for starters.
Interesting if the survey is still up to date that its the saw most owned by members, so can anyone point me in the direction of a thread or two which talks about this saw, particularly refurbishing one, please

 

[user22161]

I have the itech - Scott & Sargeant version which is identical and when the wheel kit arrived it was in SIP box. I ordered another riving knife from SIP which IIRC was under a tenner and they no doubt have the blade guard as well. The fence is an Align- a-Rip but to buy a new one with rails won't be cheap. Alternatively, there are some youtube videos about making your own Beesemeyer style one.

 

[Westwood]

Thanks very much for that Graham, very interesting , I knew nothing about that.
I'd like to follow this up but perhaps this thread is not the place. I'll start a new one