Bandsaw Spares

[magsbrad]

Bandsaw Spares for Farmer band saw (30 years old)
Drive belt required 25 3/4" Length cylindrical any info on suppliers appreciated.

 

[ondablade]

Normal 'V' belts are generally made to one or another standard specification. Most of the more exotic modern varieties too - like timing belts. So you don't necessarily need spares specific to your saw.

Chances are if you bring the old belt into a specialist power transmission supplies place that they will be able to match it up with a new one...

 

[OPJ]

You could also try looking at the Bearing Boys website - they may have something suitable available.

That's the good thing about bandsaws - there aren't many components that can break or go missing. And, if you do require spares, there's often something available from many sources that'll suit your machine. :wink:

 

[Davyboy]

You could try 'Beeline Engineering' & describe the machine to them, & I'm sure they will be able to help.

 

[Sportique]

Try this site:

http://www.lathes.co.uk/page4.html

I know you need a bandsaw belt not a lathe belt, but these are very helpful people and may be able to help

Dave