3D printed adaptors for cyclone

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

paulrbarnard

Established Member
UKW Supporter
Joined
5 Mar 2017
Messages
2,938
Reaction score
3,504
Location
Shepton Mallet, UK
I received a small cyclone for Christmas to use with my shop vac. I needed a couple of adaptors to make the connection. A quick design in CAD and on to the 3D printer just before bed. I went to the workshop this morning to fit it all together. Unfortunately the adaptors are not a good fit
A3B44408-8936-4925-97B1-18FF8C3EFFA1.jpeg

I had ABS in the printer and set the temperature for PLA.
It’s printing again 😀
 
I received a small cyclone for Christmas to use with my shop vac. I needed a couple of adaptors to make the connection. A quick design in CAD and on to the 3D printer just before bed. I went to the workshop this morning to fit it all together. Unfortunately the adaptors are not a good fit
View attachment 99549
I had ABS in the printer and set the temperature for PLA.
It’s printing again 😀

Would love a 3d printer but would not know where to start!
 
Back
Top