Search results

Yes Alan

Perhaps in all this, the neersayers may respect one of the most customer orientated retailers in the country ..."John Lewis" if you buy something from them and they drop the price afterwards then you can pricematch against the new lower price for up to a month I believe. I have done this (on...

Michael said Couldn't resist Philly :D I just happened to be looking at this because this seems incredibly good value and may make a permanent install for my workshop. I will build a small lean to outside though to save space and avoid the filters. Cheers Alan

To set up the chisel and bit, but the bit in the chisel until it is in as far as will go . Then insert the chisel into the morticer but between the morticer body and the shoulder of the chisel insert the edge of a 2P coin (it's only a spacer) then tighten the bit in the chuck. Once tight take...

Did that count this one out http://www.tlc-direct.co.uk/Products/EK320A.html as it fits your spec with just one button to push. Alan

Tony, Be aware if you go for clico bits the shank size is 13/16ths and if you have an import morticer yopu will be unlikely to have a bush that will accept this size. It is possible to get one made as that is what I had to do in the end. My machinist is fully commited to building his drag bike...

Matt, Thanks for taking the time...I'm with you 100% I was thinking it but lacked the enthusiasm to write it....calm ...I must be calm...Actually if you speak to your credit card company, they (rutlands) failed to deliver the original order, therefore you are entitled to refund and they collect...

Best to have two sets of earphones. 1)Completely sealed, for using on the train to shut out all the annoying people with their MP3's with sound bleed and so as to not add to the annoyance. 2) hook over the ear sports ones that allow external sound past for cycling and running...and walking for...

I did this in my house recently, I fitted the oak linings and then taped up the lining before plastering. I admit it wasn't perfect, eg did get some plaster on some bits, but the whole fitting process was a lot easier. Fitting solid oak frames was hard enough without trying to line up and match...

Trim wrote Alchemist wrote Now there is a link! where did the 33 years go from when I was fit to a creaking groaning 49 year old without a drink problem... not spilling it yet :-) . Just to reiterate, get into it but watch the injuries, I did something very active after a few weeks working...

They will absorb moisture from the air but only for a short time until they get saturated. In an ideal world you would put a fresh one in a sealed drawer/container and it would remove and store the atmospheric moisture. Some of these bags have a litmus tag indicator going from blue to pink when...

The online catalogue at that link is a 2003 catalogue. The Axminster unit says it has three speed push button controls, (which mine has as manual overide, it's unlikely to be a different one lacking remote facility having been so successful a seller especially if the same control is still used...

I have the jet and am very pleased with it. It has a diverter (like a car vent) so you can point the draft where required, handy because I had to mount mine in the middle of the workshop in the apex and it sets up a circular draft by pointing to the side. Very quiet on low speed and the remote...

http://cgi.ebay.co.uk/IMO-INVERTER-3-TH ... dZViewItem Have a read of all the info in this link it gives prices and power matching towards the end Alan

Me too ...tasteless fizzy pop :-) Give me a pint of haviestoun "old engine oil" any day.! Alan

A strong robust no nonesense piece of furniture. Good to see, there are some pretend pieces like this on the open market but when looked at in scutiny they are not as solid as first appearing. Hands tied or not good piece, and I do see what you mean about the matching pieces, looking closely I...

I really like this piece and aspire to having the courage to do something similar. It's always the design that limits me in starting a project, not having the vision in my head and not knowing how it'll turn out until finished. I always move a project along quicker for other people who come to...

Sorry mailee I have no knowledge of guns, so cannot help there. Indeed I would have to agree with you there, but it is in his converted garage office not his lounge :-) Oh and yes they are decommissioned (I know you asked tongue in cheek but thought I had better clarify). He did explain in what...

Mailee you deserve to do well there is no doubting your enthusiasm and hard work. looks like it's paying off too. Well I hope it's paying, you haven't done it for a years supply chicken fried rice and crispy noodles have you? Alan

I think the gun stock is...but the rack is sapele with a walnut crystal (vandyke) water stain (double strength). Alan