Search results

This should give you the info :-https://www.ukworkshop.co.uk/forums/viewtopic.php?t=17357&highlight=

http://thewoodwhisperer.com/?cat=3 The above shows a torsion box project some of the info may be useful.

These vids may help :-http://thewoodwhisperer.com/?cat=3 for the box details.

Check the adjustment of the main bearing you can undo a lock ring then rotate the bearing to tighten it up and re lock this removes side to side play. It can also help to support the motor (block of wood ) to get rid of vibration.

Thanks Hitch i have ordered in a 3m length and am quite pleased as it will look a better job.

I need 3m s/steel 12mm threaded bar i was thinking of jointing some 1m lengths so i need joint sleaves or long nuts found the nuts at fastfix but only in 50s, can any one sudjest a supplier or a better solution

Does this helphttp://www.armitage-shanks.co.uk/plan/index.html

I think i have solved this withhttp://www.codecpackguide.com/klcodec.htm downloading 3.1.0 standard just put in a dvd and told vista to use klcodec and it worked, of course you get the fight between media players for file types but it is easy to set.

Is there a free download to enable Vista Home Basic to play DVDs the facility that came with Nero has expired. The usual Real +Quicktime do not have it, thanks in anticipation.

To refinish boards a planer/thicknesser or a drum sander m/c will do it but one piece of steel and your in trouble .Ply comes in 4 & 6mm thick so you could have tongues cut and route grooves in the board edge. Any board cupping will give you problems and shims will be required to keep floor...

Does this help:-http://www.diydata.com/planning/planregperm/planning_rules.php

Like many people i have been through this twice actually, memorys will fade and you move on .practical solutions :-alarm system with a visible PIR ( my brother inlaw who has worked in prisons says they hate them) window locks and five lever locks on front and back doors, security lights don't...

Is it easy to turn by hand check with both the clutch engaged to drive the feed rollers and with it disengaged, if its hard to turn it will trip out on start up .However if its blowing main fault circuit breaker then its faulty and time to call a electrician or FOX.

This job is a good example for every one, you found out the technical requirements identified the specific site problems came up with solutions then worked hard to make a permanent job. I am glad the info you obtained here helped in planning and implementing the job it looks well worth the effort.

I have just won three marples chisels on ebay just need paint and putty removed and sharpening £5.50 + post so if you want good old steel its worth considering.

People in a building produce water vapour (w/v), insulation can over time be saturated by this also wood and water don't live well together. Wall construction should be inner lining ,continuous vapour barrier (v/b),insulation ,breathable membrane (b/m),a gap ,outer cladding. The w/v is stopped...

If its lime mortar it will come out easy just scraping and the odd blow with a plugging chisel page 760 screwfix. This may be usefulhttp://www.mikewye.co.uk/mikeprices.htm

Yes look in control panel it has its own control there, its used for some displays .

Have a look at page 757 of screwfix there is a mortar gun .

Remove the raised bed it has no strength slab the area beading slabs with plenty of mortar or cast a base then build shed. The forces applied to foundations are directly vertical there is no side force.