Search results

I am surprised that the support arms do not fold clear, they do on my low cost effort so check sizes of parts on drawing n,r,&q . I have fitted ordinary 3'' hinges o to m (under to provide 90 deg. movement) and a small block of wood to hold p in the correct position on m then fitted pivots...

The Jessem Rout-R-Lift allows bit changing from the top but most routers do not allow the chuck to come through the plate so you can get your spanners on, so a shaft extension is required .This means you want top quality bearings in the router and speed control so go for trade quality. I use a...

We had our overhead system replaced by buried cable recently and the electric company could be forced to make good properly or pay some compensation so find some contact details and get in touch with your requirements remember the ground will drop over time as the soil consolidates.

Yellow pages, steel stock holder.

This may be helpful http://www.thinkbroadband.com/ If you have sky you can be connected very cheaply.

I have purchased a number of parts from these. http://www.espares.co.uk/search/tumble-dryers/p/1088 they seem to list items that are common faults/problems so you may get a idea from there list.

My understanding of felt shingles is that they are nailed and any stickiness is to hold the tabs down, so tab is stuck to shingle under not the background.This allows the breathing to dissipate out from under the shingles.

Are you aware there is a double lock you have to loosen the nut twice to finally release it also check for muck in the collet .

No tape required just correct overlaps fix with staples.

Masking tape works for this and its easy to fine tune and put holes in for fixings.

More pictures. A slightly unusual layout but i think it will be quite useful .

Conventional loft/flat roof insulation is cold roof it insulates then any water vapour passing through is taken away by the cold cross ventilating air above the insulation. This system stops water vapour with foil, insulates and can then have a impermeable roof covering directly applied no...

Hopefully you should have links now.

I built the shop 16 years ago its been since modified for double doors and the passage way between it and the garage was sheeted over and doors fitted for dust extractor The plan is to use existing doors and window frame . After extracting frame made small window bricked up a support pillar...

I have found a firm that waterproof basements and give advice. http://www.safeguardeurope.com/

I have seen this dealt with on tv they cut a cannel in the floor to direct the water coming through the wall to a sump cut in the floor then fixed some tanking fabric stuff to the wet wall to direct the damp to the channel.

They are to hard to sharpen, induction hardening i think.

I remember from school that they inserted the key and then hit it to loosen the chuck it worked for my metal work teacher.

I think you may have to make some from hardwood, plumbing has been metric for a long time.

I used the dry wall system see my www (5 interior) http://www.wickes.co.uk/Plasterboard-125mm/Tapered-Edge-Plasterboard/invt/220210 12.5 is best and fire proof .Use drywall screw driver fitting it sets the screw just right, self adhesive scrim tape, filler applied with wide scraper first then...