Yet more glue questions

[gregmcateer]

Hi folks
I'm wanting to glue a foot made of clear plastic/ rubber bung type thing to a piece of stone/ quartz worktop offcut.

I've used araldite, and when it let go of the bung I've tried scoring it and regluing , but it still let's go with the smallest of handling knocks.

Does anyone know a better approach?

Thanks in advance

Greg

 

[Gordon Tarling]

If both surfaces are smooth and clean, then some VHB tape might do the trick. Otherwise, maybe some JB Weld Plastic Bonder might work - both products available from your usual online suppliers.

 

[Distinterior]

Just drill 4 shallow holes in the underside and use an inserted type of foot instead .......They won't fall out or off then.....6mm holes are all thats needed and Quartz is easy enough to drill with a decent quality masonry bit......I've done it plenty of times for customers.

 

[gregmcateer]

Thank you both, gents.
Will give it a go.
Cheers
Greg