St James' Bay Tool Company infill plane kit
- Thread starter gasman
- Start date
Help Support UKworkshop.co.uk:
gasman
Established Member
I wanted to get this plane finished this last weekend amongst lots of other stuff - and thought it would be a breeze.
Here's the plane complete with beautifully-engraved lever cap - and finished in all respects except the sole
I started making shavings once the blade was sharp - and then realised that the sole was not flat as I could not take a full width shaving. I need to flatten the sole which must have been distorted during the peening of the riveted sides. Note to self, when experts tell you not to do something, don't ignore them
Anyway I think it will all be fine in the end - but I just need to get to work on that sole
It does sit quite nicely amongst some other planes
I should be able to flatten it tonight
Regards Mark
Here's the plane complete with beautifully-engraved lever cap - and finished in all respects except the sole
I started making shavings once the blade was sharp - and then realised that the sole was not flat as I could not take a full width shaving. I need to flatten the sole which must have been distorted during the peening of the riveted sides. Note to self, when experts tell you not to do something, don't ignore them
Anyway I think it will all be fine in the end - but I just need to get to work on that sole
It does sit quite nicely amongst some other planes
I should be able to flatten it tonight
Regards Mark
Attachments
gasman
Established Member
After a lot of flattening on 80G sandpaper to start with, then various diamond stones I think the sole it is reasonably flat
I tried it on some yew and it takes nice thick and thin shavings
The lever cap really is beautiful - I have spoke to Ian Houghton and he is going to make me the stamp about 80% the size of this engraving. He is a true gentleman and I will be repaying his generosity in kind
Outdoorsy shots:
Overall I am pretty happy with it for a first attempt. I have learned a huge amount which was one of the main aims. I will definitely make the next one from scratch and will be better prepared to avoid some of the pitfalls. I wish I had put an adjuster in as I just prefer planes with adjusters but maybe if I make myself use this one I will get better at adjusting those without adjusters?
Despite what Jimi said I actually really enjoyed making the overstuffed infill. The TruOil is fabulous stuff. My worst error was peening the 3 rivets to secure the infills - it opened a couple of the dovetails a fraction and although it is not completely ruined - they are visible now when they were not before. Not sure what I could have done to avoid that apart from using screws (yes I know you told me so). I really like my lathe and mill and have used them both since and am gradually owing in confidence. I think the kit is an outstanding way of learning to make a plane.
That's all folks
I tried it on some yew and it takes nice thick and thin shavings
The lever cap really is beautiful - I have spoke to Ian Houghton and he is going to make me the stamp about 80% the size of this engraving. He is a true gentleman and I will be repaying his generosity in kind
Outdoorsy shots:
Overall I am pretty happy with it for a first attempt. I have learned a huge amount which was one of the main aims. I will definitely make the next one from scratch and will be better prepared to avoid some of the pitfalls. I wish I had put an adjuster in as I just prefer planes with adjusters but maybe if I make myself use this one I will get better at adjusting those without adjusters?
Despite what Jimi said I actually really enjoyed making the overstuffed infill. The TruOil is fabulous stuff. My worst error was peening the 3 rivets to secure the infills - it opened a couple of the dovetails a fraction and although it is not completely ruined - they are visible now when they were not before. Not sure what I could have done to avoid that apart from using screws (yes I know you told me so
). I really like my lathe and mill and have used them both since and am gradually owing in confidence. I think the kit is an outstanding way of learning to make a plane.That's all folks
Attachments
Yay, shavings!
Congratulations on not only achieving such a lovely end result, but for sharing all the highs and lows with the rest of us. I'm sure you will have helped others to follow your lead and have a go, aided by your experiences. What's next?
=D> =D> =D>
Congratulations on not only achieving such a lovely end result, but for sharing all the highs and lows with the rest of us. I'm sure you will have helped others to follow your lead and have a go, aided by your experiences. What's next?
=D> =D> =D>
Looks like you have a vacancy on your middle shelf.
How about a nice Chariot or a Holtey 11-SA High Angle Infill Smoother ?
making-an-infill-plane-copying-the-master-lots-of-pics-t25988.html
Good size for your next project or like Pete says a shoulder plane.
Still can't believe this was your first time, can't wait for your next plane whatever you decide.
=D> =D> =D>
How about a nice Chariot or a Holtey 11-SA High Angle Infill Smoother ?
making-an-infill-plane-copying-the-master-lots-of-pics-t25988.html
Good size for your next project or like Pete says a shoulder plane.
Still can't believe this was your first time, can't wait for your next plane whatever you decide.
=D> =D> =D>
jimi43
Established Member
Well Mark...you nailed it!
That logo is really the icing on the cake and I'm so pleased it worked out so well...difficult one to crack!
I agree about making one yourself now...I think the one Aled did way back then was a superb example and it's a handy plane to have in your arsenal too!
Great to finally see this thread where it belongs too! I nearly missed it! :mrgreen:
Cheers
Jimi
That logo is really the icing on the cake and I'm so pleased it worked out so well...difficult one to crack!
I agree about making one yourself now...I think the one Aled did way back then was a superb example and it's a handy plane to have in your arsenal too!
Great to finally see this thread where it belongs too! I nearly missed it! :mrgreen:
Cheers
Jimi
