Sold Selection of Turning Tools, MultiStar chuck and 4 Turning books

[toysandboats]

All items now sold or withdrawn

My little SIP lathe gave up the ghost several years ago and I've finally decided that I'm not going to replace it.
So, the following items are all available and can either be collected from Eastleigh in Hampshire or I will post them and charge you the cost.


1). Multistar Duplex with DJ45 jaws, probably a 3/4" x 16 tpi thread though adapters are available for example: Thread Adapters
£30 + postage

2). The tools in the photo below are, from left to right (or top to bottom):

1.4 mm Robert Sorby narrow parting tool
5.8 mm Crown HSS parting tool
20 mm Crown HSS roughing gouge
11.7 mm Crown HSS spindle gouge
8 mm Crown HSS spindle gouge
8.7 mm Crown HSS bowl gouge
13 mm round skew (no make, it was bought on a course I attended)
21mm Crown HSS oval skew
19 mm HSS half round scraper (bought at a show and I put the handle on)
24 mm Crown HSS round scraper
17 mm Crown HSS internal scraper
6 mm Crown HSS skew
4 mm Crown HSS spindle gouge

I would like £15 per tool or £165 for all 13 tools + postage
I would prefer that they were sold as a single package

3). and the books are:

Mike Darlow's Fundamentals of Woodturning
Keith Rowley's Foundation Course
Richard Raffan's Turning Wood
John Sainsbury' Turning Miniatures in Wood

£3 per book or £10 for all 4 + postage please

David

 

[Welsh Wizard]

Hi David,

pic hasn’t come out but Im interested in all 3 skews and the round scraper if you manage to sell as whole...

thanks,

myles

 

[Welsh Wizard]

Oops Sorry that was meant to be if “you DON’T sell as a whole”

 

[toysandboats]

Photos are now visible (I think) but I have had a reply from someone interested in all the tools

 

[Tanglefoot20]

I could be interested in the Raffan book if you still have it...