johna.clements
Established Member
Was it a robot or who did you get to chain for you.I would use my Total Station, but it's overkill really.....
Was it a robot or who did you get to chain for you.I would use my Total Station, but it's overkill really.....
Fully robotic, I use them for a livingWas it a robot or who did you get to chain for you.
I have used them a few times but they came in after I stopped setting out.Fully robotic, I use them for a living
Getting the 'shed' square becomes a little more taxing as they get bigger. We did one last year that was roughly 1.4 million square feet, 580 metres long by 220 metres wide, or about 18 football pitches in area.Fully robotic, I use them for a living
Yes, I have used some of the older stuff over the years too. Still do basic quick setting out with two tapes sometimes. I still have a full chain somewhere in the workshop......I have used them a few times but they came in after I stopped setting out.
The first site I worked on we used a Hilger and Watts 20" theodolite plus steel tapes. We got in an EDM so set out the base for a gantry where we could not easily tape to the bases. The jobs after that I used a total station.
When I was at technical college we were taught using actual chains and arrows. Quite good for rough land surveying as you could leave it on the ground and tape detail from it. But never used one in real life, way too slow.
They are still available to buy, York Survey Supplies for example.I have not seen a chain since technical collage.
The ones we used were metric.They are still available to buy, York Survey Supplies for example.
But they are metric
Enter your email address to join: