Mike-W
Established Member
I am in the process of reorganising my workshops and find I no longer need my Record Power Dust Extractor, it’s a RDX 800i running on a single 1000 watt motor and 4” inlet connection.
Although it comes fitted with legs for floor standing I had it mounted on the wall over 2 meters off the ground- it was quite successful at picking up chips from my planer thicknesser.
(I still have the plywood frame for wall mounting if needed).
The specification is similar to the current Record RSDE3 selling at £244 from Yandles.
I have a new filter Element and paper filter ready to fit along with some additional paper filters and about 10 unused polythene collection sacks. There is 1.5 meters of hose fitted. I am looking for £50 for the extractor plus carriage at cost - or you can see it running and collect it from my home in West `Berkshire.
Additionally I can find some extra hose clips, ‘T’ joint and other fittings if you want to plumb this in permanently.
Please email me if you are interested.
Best Wishes Mike.
Although it comes fitted with legs for floor standing I had it mounted on the wall over 2 meters off the ground- it was quite successful at picking up chips from my planer thicknesser.
(I still have the plywood frame for wall mounting if needed).
The specification is similar to the current Record RSDE3 selling at £244 from Yandles.
I have a new filter Element and paper filter ready to fit along with some additional paper filters and about 10 unused polythene collection sacks. There is 1.5 meters of hose fitted. I am looking for £50 for the extractor plus carriage at cost - or you can see it running and collect it from my home in West `Berkshire.
Additionally I can find some extra hose clips, ‘T’ joint and other fittings if you want to plumb this in permanently.
Please email me if you are interested.
Best Wishes Mike.
