Post a photo of the last thing you made

[Cabinetman]

I made a folding stool for a friend - they wanted something to reach tall cabinets in the kitchen, but they didn't want it to be on display all the time.

I didn't have a table saw or a planer / thicknesser at the time, so I milled all the parts for it by hand from this slab of oak:

View attachment 193256

Scrub plane, followed with a jack plane produced square-ish edges:

View attachment 193257View attachment 193260

To speed things up, I used a circular saw, taking passes on both sides, flipping the slab around, slowly increasing cut depth. Once the cut depth was maxed out, I cleared out the middle with a hand saw. The boards were not nearly the same thickness, which caused some headaches with positioning the seat boards later, if I was doing it again, I'd make sure the parts are definitely the same.

View attachment 193262

After a bit more sawing and drilling, I ended up with the parts ready for assembly:

View attachment 193263

Two middle seat boards had some pretty dramatic grain, unfortunately it doesn't pop as much after applying varnish

This contraption helped me get the correct final widths for the seat boards:

View attachment 193264

I glued everything up, and then took it all apart to apply some varnish:

View attachment 193265

And this is the finished product:

View attachment 193266
View attachment 193267

View attachment 193268

It's not perfect, I definitely wouldn't chamfer seat boards on both sides again, difficult to get rid of squeezout after the glue up.
I'd make sure all parts are identical, and I'd probably make myself some alignment jig for the glue up, it was awkward
The 'client' loves it though, so that's all that matters

I have some experience of foldable bits and bobs, and your stool is very good, both in design and workmanship.
Very easy to make an unstable thing that doesn’t really work, damhik!

 

[madmango]

The first project on the new bench?
Came out well, is this your design?

Yup, first project on the bench! It makes a huge difference.
The design isn't mine, I borrowed this one:



In the video, the guy says it took him an afternoon I'm not going to admit how long it took me

I have some experience of foldable bits and bobs, and your stool is very good, both in design and workmanship.
Very easy to make an unstable thing that doesn’t really work, damhik!

Thank you! I wasn't too confident at first, I've added those bottom stretchers last, and without them, it was quite wobbly.
They add a lot of stability, with them glued in place, it's very solid.

 

[Fitzroy]

Yup, first project on the bench! It makes a huge difference.
The design isn't mine, I borrowed this one:



In the video, the guy says it took him an afternoon I'm not going to admit how long it took me



Thank you! I wasn't too confident at first, I've added those bottom stretchers last, and without them, it was quite wobbly.
They add a lot of stability, with them glued in place, it's very solid.

Snap, one of my first projects back in 2015, made as a surprise for a friends kitchen to help kids reach the cupboards, whenever I speak to them they still say it’s in use. It’s a great design.

Fitz

 

[Bumble]

This years only shop made christmas present. Not the most advanced thing I built but think it turned out quite ok. Hope our dog will like her new food bar

View attachment 193206
View attachment 193207
View attachment 193204

I love that! I'm applying for a licence to reproduce...

 

[Essex Barn Workshop]

You know when you make some items for sale, but one of them just insists on staying at home with you?
I made several magnetic knife blocks over the last week or so, but this one is not going to be sold, I just love the grain too much!

This was before a little more sanding and finishing, but was the only photo without knives on it I took!

And a side view:

On rubber feet.

 

[Dr Al]

This is only tangentially related to woodwork, but today I released a new version (following a complete overhaul) of my hobby website, with most of my woodwork and metalwork projects on it. The new website should be much easier for me to maintain and also much easier to read on mobile phone browsers. It's almost exactly 10 years since I started the website but I'm much happier with the look and feel of it now.

Screenshot of the projects overview page:

Link for anyone who's interested: https://www.cgtk.co.uk

 

[Bumble]

This is only tangentially related to woodwork, but today I released a new version (following a complete overhaul) of my hobby website, with most of my woodwork and metalwork projects on it. The new website should be much easier for me to maintain and also much easier to read on mobile phone browsers. It's almost exactly 10 years since I started the website but I'm much happier with the look and feel of it now.

Screenshot of the projects overview page:

View attachment 193529

Link for anyone who's interested: https://www.cgtk.co.uk

Yes, I'm *bookmarking* this web page!