Post a photo of the last thing you made

[DiscoStu]

Well this is the last thing I made. I've posted about it in a thread called "Wine Carrier" so I won't bang on about it here.

Sent from my iPhone using Tapatalk

 

[devonwoody]

Good job, how did you get the labelling to the timber? wine carrier.

 

[DiscoStu]

I posted a more detailed account but it's laser etched courtesy of Mike Dempsey who very kindly offer to do it for me. It's looks stunning in the flesh.


Sent from my iPhone using Tapatalk

 

[romi]

solid oak :wink:

 

[Beau]

Fantastic work romi =D>

How long to make that lot?

 

[romi]

Fantastic work romi =D>

How long to make that lot?

thank u
well i work only i with my father
it took me 22 days... sanding and details took a lot of time ,and math of course ,all must be precise/accurate
but i don"t work all day long,i work 5-7h day

 

[DiscoStu]

That looks great but what's with the photos? Looks like you've applied some retro filters?


Sent from my iPhone using Tapatalk

 

[romi]

That looks great but what's with the photos? Looks like you've applied some retro filters?


Sent from my iPhone using Tapatalk

no filter.. bad phone camera and maybe the light

 

[Beau]

Fantastic work romi =D>

How long to make that lot?

thank u
well i work only i with my father
it took me 22 days... sanding and details took a lot of time ,and math of course ,all must be precise/accurate
but i don"t work all day long,i work 5-7h day

22 days for all that! Even more impressed now.

 

[romi]

Fantastic work romi =D>

How long to make that lot?

thank u
well i work only i with my father
it took me 22 days... sanding and details took a lot of time ,and math of course ,all must be precise/accurate
but i don"t work all day long,i work 5-7h day

22 days for all that! Even more impressed now.

well..i got a full equipped workshop ..or most of machinery
so it's easy...

 

[MarkDennehy]

Well, damn. And to think I was proud of this!

 

[Khendon]

New here and new to woodworking, so thought I'd post the couple of little items I have made...

Paul Sellers style workbench, modified slightly to fit in my garage.

Bench

Ash picture frame for my wife, bit tricky to work with, might not try that again for a while...

Frame
First attempt at dovetails, little set of stairs for my brother-in-laws pug (don't ask)

Just painting these now, then on to the next project.

Steps

Regards

 

[dzj]

A fine looking bench. Well done!
The dovetails on the steps are not too bad. I'm sure they're
doing the job.
Perhaps a tad too little stock left (between 1st and 2nd step) when you cut out the arc.
All in all, for someone new to woodworking, good job!

 

[thetyreman]

New here and new to woodworking, so thought I'd post the couple of little items I have made...

Paul Sellers style workbench, modified slightly to fit in my garage.

Bench

Ash picture frame for my wife, bit tricky to work with, might not try that again for a while...

Frame
First attempt at dovetails, little set of stairs for my brother-in-laws pug (don't ask)

Just painting these now, then on to the next project.

Steps

Regards

superb work there!

 

[Khendon]

Thanks muchly folks. Tricky business this woodworking lark, but very enjoyable.

A fine looking bench. Well done!
The dovetails on the steps are not too bad. I'm sure they're
doing the job.
Perhaps a tad too little stock left (between 1st and 2nd step) when you cut out the arc.
All in all, for someone new to woodworking, good job!

Yeh I think you're right about the too little stock. Hmm I hadn't noticed that.

Hopefully as they are for a small dog it won't be too much of a problem.

Maybe I'd better warn the brother-in-law not to stand on them himself too much...

Regards

Dave

 

[Chip shop]

Had some free time today so had a crack at some signs for a mate. I found some slightly manky elm and graded it best I could.

[/URL]

Ended up like this:

[/URL]

I'm a bit naffed off with the split in the "Plas Y Coed" sign, but I have a little more of the same board that I might be able to squeeze a replacement out of...plus it's a freebie, so I might toss it off and have a beer :lol:

 

[ColeyS1]

My word.. those signs look really smart !! I'm sure the recipients will be chuffed to bits !
Nice job

Coley

 

[custard]

Very smart. Were they carved or routed?

 

[Chip shop]

Very smart. Were they carved or routed?

Soz, I can't claim any great skill, I did them on the CNC.

 

[Phil Pascoe]

No sheet, Sherlock. :lol: