Motor Clinic - poor service warning!

[9fingers]

Service at the motor clinic might be a bit slow for the next month.

I'm off to France on 25th May and will only have sporadic internet access until the following Friday when we arrive at base camp.
I'll be back home hopefully by 18th June.
In between those dates, I should be able to help by email but I can't do any house calls unless you are within easy travelling distance of Montaigu de Quercy 82150 that is.

Bob

 

[woodbloke]

Service at the motor clinic might be a bit slow for the next month.

I'm off to France on 25th May and will only have sporadic internet access until the following Friday when we arrive at base camp.
I'll be back home hopefully by 18th June.
In between those dates, I should be able to help by email but I can't do any house calls unless you are within easy travelling distance of Montaigu de Quercy 82150 that is.

Bob

Have a good trip Bob...don't forget the vino in those tubes :wink: - Rob

 

[9fingers]

Thanks Rob,

Do you want any 100mm tube bringing back?

Bob

 

[woodbloke]

Thanks Rob,

Do you want any 100mm tube bringing back?

Bob

Many thanks for the offer Bob...it's a thought, but although I'm going to fit an extraction system next year, I haven't given any real thought to how I'm going to do it. I think once I've got all my new gear positioned and plumbed in I'll then be able to look at a system - Rob

 

[wizer]

Have fun Bob (bloody retirees :roll: :lol. Whilst I don't want you to bring me back any tube. I'd be interested in knowing how much it is. I'm in the same position as Rob. Will be doing it next year if my return to work goes well.

 

[TheTiddles]

Do you want your biscuit jointer back any time soon?

I've kinda grown quite attached to it!

Aidan

 

[OldWood]

Thanks Rob,

Do you want any 100mm tube bringing back?

Bob

Hmm - curious. I thought most wine bottles were around 75mm diameter; perhaps I've got my 'tubing' (and priorities!) muddled up. ccasion5:
Rob

 

[9fingers]

Hi Aidan,

I'll need it back for a project that I have to start on my return. So if you can plan your biscuiting jobs to complete whilst I'm away that should wok out fine. My project needs to complete by mid July so you could have it back afterwards if needed.

Bob

 

[9fingers]

Have fun Bob (bloody retirees :roll: :lol. Whilst I don't want you to bring me back any tube. I'd be interested in knowing how much it is. I'm in the same position as Rob. Will be doing it next year if my return to work goes well.

Typical prices here Tom

http://www.bricodepot.fr/montauban/node/479365

I bring it back in short lengths around 1m to fit in the car. It is useful after blast gate as a coupler for flexi and adaptors to home made fences etc. Y branch fittings can have their place in flexi runs too. The main piping can be done in 110mm UK stuff open end of 110mm pipe glues nicely around the collar of Axi blast gates.

 

[9fingers]

Thanks Rob,

Do you want any 100mm tube bringing back?

Bob

Hmm - curious. I thought most wine bottles were around 75mm diameter; perhaps I've got my 'tubing' (and priorities!) muddled up. ccasion5:
Rob

Woodblokes comment arises from when I told him that the pipe did not take up much room in the car as I could thread wine bottle up inside the 100mm OD pipe.

Bob

 

[JMcK]

Wave as you go past. Have a good time. The weather is picking up nicely.

 

[9fingers]

Wave as you go past. Have a good time. The weather is picking up nicely.

Thanks, will do! Look to the west. We will be passing through Angouleme next Thursday around lunchtime.

Bob

 

[clewlowm]

bob. your more than welcome to use my domino. rather than biscuits. i have all the size of doms. and i have no use for it at the moment. please feel free to have a long term hire?

 

[9fingers]

Thanks Mike,

I'll see how things go after the holiday.

Regards

Bob