Military Flush Handles

[maltrout512]

Starting to get together all the materials that I need to make a vehicle gun box. This is to sit in the rear, width and depth of boot and about 250mm high with two draws. The problem I have come across is trying to find flush military handles in brass. Have spent some time on the net but have not come up with the right handles. In fact most are not even flush fit. If anyone has any ideas I would be most grateful.

 

[John. B]

These might help
www.inbrass.co.uk/acatalog/Flush_handles_and_rings.html -
www.IronmongeryDirect.com

John. B

 

[lurker]

http://www.screwfix.com/prods/85262/Iro ... shed-Brass

 

[maltrout512]

John, many thanks the inbrass site came up and bingo first handle on the list.
I will be starting this project in the next week and will put up some pics as it goes. I'll make sure you are at the top of the credit list. Many Thanks.

 

[Jamie Scott]

Try Marshall Brass or Savills. Both suppliers of traditional fittings.
Hope you manage to pick something!