Phil Pascoe
Established Member
I had three, all three failed quite quickly.
Led light panels
- Thread starter DomP
- Start date
Help Support UKworkshop.co.uk:
DomP
Established Member
I'm lost now, I may just buy a couple and see what I think of the colour before splashing out on 8-10 of them
meccarroll
Established Member
I think the colour we see will vary person to person as we are not all the same. The colour charts are a guide to what is expected.
For workshop use I prefere cool lighting around 6000k which is more like working in daylight. I don't see 6000k as "blue" in itself but it can enhance the blue items. It depends upon what feels comfortable to each of us, when I was younger I could easily work at 3000k but my eyes have changed over the years and 6000k seems better for me to work in now when possible.
Yorkieguy
Established Member
My little 8ft x 10ft workshop has a pitched roof, and was lit with two twin tube fluorescents.
In 2020, a friend installed eight 600 x 600 LED panels in his workshop which had a flat ceiling. I was really impressed with them so decided to replace my fluorescents with a couple of panels. I fixed them beneath the rafters in wooden 'boxes' that I made. What I hadn't appreciated was that the LED panels wouldn't 'flood' the room with light in quite the same way as the fluorescents, so no light was radiated above the level of the panels. Hence, anything stored in the rafters or on top shelves was in complete darkness. The net result was that I left the panels in place, but re-installed the fluorescents, so the LED panels ended up being in addition to, rather than in place of, the fluorescents.
I've attached some rather poor quality pics of one of the panels.
First pic: The panel housing 'box'.
Second pic: The hinged LED panel in situ.
Third pic: The panel ready for use.
Fourth pic: The workshop I built from scratch in 2003, and roofed with felt shingles, which are as good today as when fitted.
Hope that's of interest.
David.
In 2020, a friend installed eight 600 x 600 LED panels in his workshop which had a flat ceiling. I was really impressed with them so decided to replace my fluorescents with a couple of panels. I fixed them beneath the rafters in wooden 'boxes' that I made. What I hadn't appreciated was that the LED panels wouldn't 'flood' the room with light in quite the same way as the fluorescents, so no light was radiated above the level of the panels. Hence, anything stored in the rafters or on top shelves was in complete darkness. The net result was that I left the panels in place, but re-installed the fluorescents, so the LED panels ended up being in addition to, rather than in place of, the fluorescents.
I've attached some rather poor quality pics of one of the panels.
First pic: The panel housing 'box'.
Second pic: The hinged LED panel in situ.
Third pic: The panel ready for use.
Fourth pic: The workshop I built from scratch in 2003, and roofed with felt shingles, which are as good today as when fitted.
Hope that's of interest.
David.
Attachments
DomP
Established Member
I've noticed some say they are edge lit, is this to be avoided?
