Laguna fusion 3

[Woodyto]

Hi everyone
I am looking to buy a laguna fusion 3 to replace my trusty Dewalt jobsite.
My workshop is a room off the side of my house. I have been trying to find out without success from supplier if the saw is delivered with the cast iron wings attached and if so can they be removed and if so will the saw then fit through a standard single door 740mm wide. I have seen a video on YouTube of someone removing the entire cast iron top but in the manual says avoid doing this and the it was several years ago. I know the saw has been updated since then
Thanks in advance

 

[MarkAW]

I recommend taking a look at the manual. It has lots of specifications and dimensions as well as exploded diagrams. Google (or other search engine) will find it for you.
Edit: it's on the bottom of this page: https://www.lagunatools.uk/laguna-products/tablesaws/fusion3

 

[Woodyto]

Thanks for your help on this.

 

[Chunkytfg]

A bit late to the party replying to this but for what it's worth My fusion 3 was dismantled to let me get it into my workshop. I took the top off it to do that. It was because it was loaded into the back of my transit in its crate and I didnt have a forklift at home to get it out so had to take it apart in situ but it is possible.
You'll need to loosen the top off anyway to square it up properly with the blade anyway so it's no big deal