dovetail jigs

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

david.tamlaght

Established Member
UKW Supporter
Joined
6 Sep 2022
Messages
59
Reaction score
19
Location
londonderry
hi all ,i ve been reading past posts on jigs and it appears the leigh ones are the mutts nuts .
different models off them though on their web page and i,m a bit confused as to where to start .
i,m looking for something with both stop and through capability and also adjustable joint size so that the joints can be set evenly to suit the height of the piece .
probably mainly for drawers and box making.
any advice appreciated
 
Depending on how you want to work and if you have, or want to make a router table then the Incra system is very good and entirely flexible.
I have an older one setup on my router table and it is good. Probably not as quick as the leigh style ones but it is used as a normal router table fence most of the time.
Also for router table use there is the Gifkins jig where it works like a leigh jig but upside down.
 
Back
Top