Chain mortiser

[Froggy]

Hi all, I’m looking to buy a second hand chain mortiser for one job ( an oak porch). I’ve had a look round and there a few cheap ones about 300-400, but would they do the job? Is it easy to sharpen the chains (I’ve sharpened chain saw chains). I’ve noticed replacement chains are very expensive. Any advice would be greatly appreciated, thanks.

 

[Tris]

Worth taking a look here, @BarbaraT had to do something of similar size iirc

Thread 'Big oak tenon Joints' https://www.ukworkshop.co.uk/threads/big-oak-tenon-joints.150957/

 

[squib]

I have a very old one under a bench somewhere, it may be an Elu and has a transformer in the lead. I seem to remember it worked ok and has a spare chain..maybe! I think it just needed a rubber grip making for the vice clamp. It's probably a collectors item but I could dig it out if you're interested.

 

[Froggy]

Hi Squib, yes I’m interested. How do you want for it and where are you?

 

[squib]

I will dig it out this afternoon and check what's what ....

 

[squib]

P

I will dig it out this afternoon and check what's what ....

Pictures in reverse order!!
I plugged it in and plunged into very seasoned oak and it worked well.....for me I would check the wiring and check if it needs greasing. There is 1 rubber boot/grip missing but a bit of rubber and evostick should be fine. It's very heavy and rather wonderful, I think it must be worth £150.

 

[Froggy]

PView attachment 198650View attachment 198651View attachment 198649

Pictures in reverse order!!
I plugged it in and plunged into very seasoned oak and it worked well.....for me I would check the wiring and check if it needs greasing. There is 1 rubber boot/grip missing but a bit of rubber and evostick should be fine. It's very heavy and rather wonderful, I think it must be worth £150.

Hi Squib yes that sounds fair to me. Where are you?

 

[squib]

Sorry.....just outside Ludlow, I will contact you on conversation which I believe is the new private message.
The chain on it is 5/8" or 16mm
I have another 3/4" but I tried it and it needs it's corresponding bar so no good.