For Sale Birch ply. aero ply 1.5mm

[davin]

I have maybe 30 sheets of Finnish Koskisen 1.5mm aeroply. This is top quality flexible ply. Is 1.5mm thick. used for laminating and curved work. Sheet sizes are 1555x1555.
My timber supplier is asking £42, but I think you can get them for around £37. I will ask £25 per sheet. Lovely stuff. Collection only i'm afraid (East Sussex) as quotes for postage were ridiculous.
Have added some photos of the sheet. and what I make with them. thanks

 

[bp122]

Cool stuff. Didn't even know it existed. Sadly I'm too far away to collect a sheet or two.

 

[Sru]

Can I ask where you get them from? Was looking for a good supplier

Thanks,

Mike

 

[davin]

Hi Mike, i was lucky enough to find a supplier doing a stock take reshuffle, and managed to buy a bulk deal. Not to be repeated i'm afraid.
If I had the time and inclination, I could cut them up into a4 sized pieces, and become a millionare on ebay.

 

[SBD]

Any chance you might look to become "mildly rich" and cut a sheet into quarters (or similar) to make it more manageable for the GPO? I'd pay postage. This stuff is brilliant for knife scales when dyed and laminated.

That wood store is awesome BTW!

ATB,

SBD

 

[davin]

Any chance you might look to become "mildly rich" and cut a sheet into quarters (or similar) to make it more manageable for the GPO? I'd pay postage. This stuff is brilliant for knife scales when dyed and laminated.

That wood store is awesome BTW!

ATB,

SBD

Of course

 

[davin]

Of course I will. PM me what sizes you need, and I will send them. Thanks davin

 

[CDS]

Hi there first post. So apologies if this is not allowed, where about sin East Sussex are you as I would like 2 sheets if I may? Depending on when they need to be collected.

 

[marcros]

Any chance you might look to become "mildly rich" and cut a sheet into quarters (or similar) to make it more manageable for the GPO? I'd pay postage. This stuff is brilliant for knife scales when dyed and laminated.

That wood store is awesome BTW!

ATB,

SBD

When you work out the postage cost, I may be interested too.

 

[SBD]

Brill, just undoing a compressor and will PM you

ATB,

A

 

[Bm101]

Could you PM me too please with delivery costs on 1/4 sawn sheet when you get a chance.
Cheers now
Chris

 

[SBD]

Of course I will. PM me what sizes you need, and I will send them. Thanks davin

Hi Davin, sorry if I'm being a complete divvy but I can't work out how to PM...

Will search it.

A

 

[Bm101]

Click on the profile pic and 'start conversation'

 

[SBD]

Thanks Bm but I dont get that option (or on yours also) may be because I'm fairly new?

Davin, ideally 750x250mm but would happily take multiples to suit you. Happy to take/pay for whole sheet's worth plus postage, just let me know.

ATB,

A

 

[davin]

Hi, My workshop is at Framfield, East Sussex tn225pn.
Will find out how to send this weekend, Long grain or short grain?
can i put my email address here ?
thanks

 

[CDS]

Hi, My workshop is at Framfield, East Sussex tn225pn.
Will find out how to send this weekend, Long grain or short grain?
can i put my email address here ?
thanks

That is only 25 minutes away from me, I would be able to collect tomorrow if that is suitable? Many thanks.

 

[SBD]

I'm DY99QD it would be bit far to come and collect

I'll contact the mods and see if they can pass you my email.

A

 

[SBD]

Sorry, grain direction doesn't matter as I will cut them to 150x50mm, stain and then laminate.

A

 

[davin]

That is only 25 minutes away from me, I would be able to collect tomorrow if that is suitable? Many thanks.

Thats fine, early is better for me?

 

[CDS]

Thats fine, early is better for me?

Anytime is good for me you just say and I will be there. Thanks Craig