Axminster nailer connector to airline

[Rob_H]

Hi I just bought an Axminster 15 gauge nailer the AT1550FN 15G FINISH NAILER 15-50MM. I bought a second hand compressor yesterday with hose. Does anyone know which connector I need to join to the airline as it doesn’t seem to fit on the one on the hose. I thought I would pull it back and fit the nailer connector in but it doesn’t seem to fit.

 

[alan895]

The connector doesn't look to be a Euro fitting so you may need something like this with the appropriate male/female thread:
https://www.amazon.co.uk/Fitting-Co...words=Airline+Fittings&qid=1656442440&sr=8-39

 

[PDW125]

Airline and compressor are fitted with older PCL fittings. Nut on the airline looks to be 1/4 BSP or taper, just remove that and fit the top right fitting with a bit of PTFE tape from this kit.

Sukudon 10 pcs Air Line Connectors Euro Airline Hose Compressor Fittings 1/4" BSP Air Coupler and Plug Kit Couplings Connector Male Female Sukudon 10 pcs Air Line Connectors Euro Airline Hose Compressor Fittings 1/4" BSP Air Coupler and Plug Kit Couplings Connector Male Female : Amazon.co.uk: DIY & Tools

 

[stuart little]

Why not just replace the Euro male on the tool with a PCL male - cheaper. I use PCL on all my air connections.

 

[Fergie 307]

Why not just replace the Euro male on the tool with a PCL male - cheaper. I use PCL on all my air connections.

likewise I find the PCL ones much better.

 

[KT -andy]

You need to pick a fitting type to use .
Basically , pcl or euro .
Google will show you what's what .

 

[Rob_H]

Thanks all - I haven’t used used air tools or a compressor before so all new to me - will try these ideas - thanks