ATC Setup Video

[meccarroll]

I'd love my srurdy metal framed CNC Router setup but it's manual change and mechanical hold down only an ATC CNC with vacuum would be a great improvement. Been following another thread where the OP is considering options for an upgrade to an ATC macbine and fell on this video, thought it might be of interest to those in a similar position to me and the other OP:


ATC components overview
https://www.bing.com/videos/rivervi...119D0B2860A0E4D25FB3119D0B2860A0E4D&FORM=VIRE


ATC setup Mach4

 

[Ollie78]

I'd love my srurdy metal framed CNC Router setup but it's manual change and mechanical hold down only an ATC CNC with vacuum would be a great improvement. Been following another thread where the OP is considering options for an upgrade to an ATC macbine and fell on this video, thought it might be of interest to those in a similar position to me and the other OP:


ATC components overview
https://www.bing.com/videos/riverview/relatedvideo?q=how+to+set+up+ATC+in+a+CNC+router?&mid=25FB3119D0B2860A0E4D25FB3119D0B2860A0E4D&FORM=VIRE


ATC setup Mach4

These guys have another option which does away with the normal tapered ISO or BT system with air operated pullstuds. Instead it seams to use a standard spindle which is used to screw and unscrew the collets inside the holder.
No idea if its any good but it does mean you don`t need to buy a very expensive new spindle.

https://rapidchangeatc.com/docs/magazine-information/magazines/