Search results

Good to hear i am expect this info will be helpfull to others with a similar space problem.

Not laminate or lino as the sawdust makes it very slippery I am happy with just chipboard.

No firings required just make stud work give you a slope. Look up kingspan for flat roofs there warm roof system it does not compress when walked on worked for me with torched on covering.

That Marples cast steel is very desirable and would sell on eBay well. The steel is very good and holds a edge.

Yes remove no volt and join through spade connectors so use double ended male and insulate x2 and plate over, then you need a remote controlled plug unit to controll. Hope you tryed it with the sustained output of a p/t.

I have no way to calculate but think it will cut the preformance in half. Is there any way to provide a small 'shed' adjacent to the garage for it ,that worked very well for me.

My point on finalising a design .If you alter a roof covering or cladding system you may have to make structural alterations and it could also affect the way you insulate so these are key things to finalise . Its always nice to have scale plans of any structure and they are also helpfull when...

You seem to be still developing your design ,i think you should finalise it. We see lots of tv programs that show this is not a good way to build. Altering something on paper costs nothing. I am lucky i have a son an architect who produces great plans and they allow you to concentrate on the...

Try connecting it direct to the 'producer' and make sure there are no blockages its one horse power should be fine for this job.I assume you are useing cloth bags top and bottom for the greatest suck.

Trusses you may find this utube interesting about one third in where they fit them https://www.youtube.com/watch?v=8mkwbqObws8

'You may well be right. You certainly are about the fatigue part of your analysis,' You need to take a break man at least 2 days. Solutions which would be quickly resolved when you are fit can be almost impossible or the solutions to elaborate when tired out. I and many others reading these...

This bulge due to a bad stud, my guess is that you are getting very tired because you know that its needs fixing and how to fix it .I think you should take a rest and plan your next portion of work ,because you will always know you could have sorted it to your complete satisfaction and it will...

Extend and make shure you support the final roof properly and also during construction , so you can reuse the end gable and save money.

Best of luck with your proposal with that amount of kit I would end up with Max half the garage and a dividing wall with a door in it to remove spoil and maintain access.

Space is what you require hang bikes on wall and provide storage say shelves then the rest is yours.

Plaster board is cheap so cut to size does this work better with it landscape and some noggins etc.

Stripping and cutting to correct length is key the better kit does this you measure and cut with eBay but it will crimp fine. Have you looked at premade cables there not that expensive.

Download a new copy of crome and sign in and they should come back

If you have a toolstation cat.its page 37 item 68322 a 2 pack then either 13901 or 22198 to connect to your hose. there a different connector but it will work out if you have a threaded connection to your hose (items are quick couplers and bayonet connectors)

This is what i did http://chrisalison.webs.com/ note insulation to floor and breather membrain.