Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. O

    Cladding concrete pillars

    Fix grounds with no-nails.Then glue and headless pin.
  2. O

    bandsaw question

    My record has slots on left and right of the blade so the miter guage can be used in either to cross cut.
  3. O

    disc sander

    I have the fox double disc and find it very good ,you can fit finer grit abrasive. Noticed this on ebay. http://cgi.ebay.co.uk/Woodworking-Fox-F31-120-12-Disc-Sander-/190428017194?pt=UK_Crafts_Other_Crafts_EH But check D&M tools for the Record nothing in it for price.
  4. O

    Ebay tips

    If no one has bid edit the add.
  5. O

    sink waste disposal

    Is this of any interest to you. http://www.screwfix.com/prods/28025&cm_mmc=Campaign-_-E10W30-_-C-_-StainlessSteelSink?source=aw
  6. O

    Advertising my business

    Contact the local free press a get then to do a piece on your new start up business with pictures and contact details.
  7. O

    Good circular saw blades?

    I use them till well blunt then buy new they do the job no special expansion features but ok any way.
  8. O

    Fein or CEL or Bosch or Worx?

    Good resale price on fein and i am happy with mine looks and feels quality.
  9. O

    Problem setting up Jet JWBS-16 bandsaw

    Does the blade 'twang' is properly tensioned, i had a blade that was made too long once, so tensioning just compressed the spring it would not cut properly. I cut a washer to a C and fitted above the spring happy days.
  10. O

    Key clamp brackets for racking?

    Have a look at 'white twinslot shelving ' in toolstation 220lbs load max per shelf easy to fix they work for me and others.
  11. O

    sink waste disposal

    We have had one for many years in fact this is the second, you turn on the tap then the disposer and put/add stuff in, it works fine never blocks the drain. the internal is ridged and a plate with sliding lets call then hammers push the stuff to the ridges and it grinds it up. Is just slightly...
  12. O

    Do I really need a 20amp supply?

    I have a ring cct. in the garage that has a 20 amp fuse and feeds the table saw (blue plug and socket unfused) and very little else, works fine for me. The protection is there for a 16amp m/c and anything plugged in to the ring is protected at 13amp or less to a max combined load of 20amps so...
  13. O

    Garage workshop conversion help

    You need a rainy day to find where the water is getting in. In the picture there seems to be something growing out of the top of the wall that has been cut off if so this will need removing and making good.
  14. O

    Chrome Raised Head Screws

    They could be mirror screws straight cut with a screw on chrome dome to cover the head.
  15. O

    Keeping my DW733 thicknesser running

    Its usually the beds need lubricating and that is the correct stuff. If the rollers are serrated dig the residue out with something pointed.
  16. O

    Sky box pausing live tv

    Switching the power off to the box say for 30 secs. then waiting for it to restart seems to cure problems on sky boxes (reboot).
  17. O

    velcro backing on sander no longer sticky, what to do ?

    I got a sheet of velcro from Ebay sanded down the worn stuff AEG not Festool( no way to peel off ) punched holes in new and fitted.
  18. O

    long thin drills

    Can you mark out and drill from both sides.
  19. O

    Headless pinner

    I use the axminster pinner no mis fires to date its fine for me.
  20. O

    Small extension to workshop

    A couple of small things with the CamVac ,is your scale correct i think they are 370mm dia also what is that angled structure round it please.
Back
Top