Table saw blades with wider kerf?

[tomatwark]

How about one of these.

http://www.swedex-shop.co.uk/index.php? ... ver&page=2

 

[Jacob]

How about one of these.

http://www.swedex-shop.co.uk/index.php? ... ver&page=2

Thanks for that.
Plenty of choices then, including the Felder, but not cheap.
I'll do some prototypes with my 3.2 blade and see how it goes.
It's a project for a local craftworker who wants some nice partitioned boxes for arty odds and ends. I like production work (multiples) so if I'm going to get set up for it I could look at taking it further.

 

[Beau]

Got an old blade? Might be able to get a saw sharpening place to braze on 4 or 6 wider TCT teeth and grind accordingly.

 

[Jacob]

Got an old blade? Might be able to get a saw sharpening place to braze on 4 or 6 wider TCT teeth and grind accordingly.

Yep, have it in mind.
Local chaps here http://www.lmcuttingtools.com/LM_Cuttin ... lades.html
Haven't called on them yet - they may have something off the shelf.

 

[DennisCA]

Those grooving blades sound like they'd be dandy in conjunction with my woodgears box joint jig...

 

[monkeybiter]

Those grooving blades sound like they'd be dandy in conjunction with my woodgears box joint jig...

I have a 6mm groover for box joints etc., on a 315mm TS I can have at least an inch above the table. It's an Axi .

 

[DennisCA]

It would work perfectly with my 48 tooth gear which moves exactly 6mm per rotation. 6 and 12mm box joints would be super simple. I have a german rapid pk-100, I get 75mm over the table wit a 250mm blade, or was it a 254mm...