SOLD - EZ Smart Setup w/ Square

[xraymtb]

Hi

Considering selling my EZ Smart SGS-100 rail setup with the EZ Square. This includes:
2 x 50" Guide Rails
Anti-Splinter edges for both rails
Smartbase for Circular Saws (up to around 9")
Anti-Splinter Inserts for Smartbase (4 On Rail and 4 Off Rail Inserts)
2 Smart Clamps
1 Set of Rail Connectors

All of the above are in as new condition, the smart base and antichip inserts have never been used as I also have:

Custom Smart Base for larger saw (over 9") with integrated anti-chip
Spare Set of Anti-Chip edges for rails (trimmed slightly - should still work with most saws)

The custom base has been drilled to suit a Hitachi C9U2 (which I may also sell for the right price), but can be redrilled if required. Finally I also have:

2 x 18" (approx) smart rails with anti-chip edges
1 EZ Square (new type)

I have used these for one project and have decided that I do not deal with enough sheet goods to warrant keeping them. They can be used for real timber, however I tend to use very large, heavy timbers that a circular saw can't really deal with.

Ideally looking for around £225 for the lot but may be open to offers.

As below - I may split the items if I get interest in enough of it.

 

[wizer]

If no one has the whole lot then I might be interested in some of the bits, especially the square.

It's a shame that you're selling it. I think you'll kick yourself next time you want to cut some sheet stock. It's horrible cutting with a regular saw board after you've used the EZ system.

Your saw is a good one BTW, I have the braked version.

 

[xraymtb]

The saw is good and I hoped it would be able to replace my table saw but it just can't cope with 2" thick hardwood. I don't really use sheet stock much - about once a year at most.

If nobody wants the full kit, I'll let you know.

 

[xraymtb]

Added guide price.

 

[xraymtb]

Open to offers...