Xerxes
Member
I have a Record SC3 chuck with a 1" x 10tpi thread. I have tried everywhere to buy an adaptor so I can use it on my RECORD DML250 which has an M33x3.5 spindle. Does anybody know where I can get one or get one made please
SC3 adaptor M33x3.5 to 1"x10tpi
- Thread starter Xerxes
- Start date
Help Support UKworkshop.co.uk:
powertools
Established Member
I thought that the sc3 had a 1" x 8tpi thread if it has an adaptor is available from Record.
+1 above.
Try giving Record a power a call, also, Yandles possibly worth a call.
Or ed Oliver at Oliver’s woodturning he’s good
Look at Charnwood Headstock Thread Adaptors they have what you need I think
Edit —- assuming the chuck is female 1” x 8 TPI —- they have an adaptor with 1”x8 TPI male to 33 x 3.5 female, it does say out of stock but delivery February.
Last edited:
Sachakins
The most wasted of days is one without woodwork
Sachakins
thats the wrong way round unfortuanly
it needs to be m33 to 1"
thats the wrong way round unfortuanly
it needs to be m33 to 1"
I had a friend with this exact problem when he was considering a new lathe and wanted to keep his existing SC3, we both spent a very long time looking and also saw the only one that may get stock was Charnwood as mentioned above but I also found a thread that it was discontinued by Record so the adapter was not being made by them, hence the best option is probably as mentioned getting someone local to make you one.
BTW incase you were wondering my friend got a new (2nd hand but hardly used) lathe that was the same size so problem removed rather than solved!
HTH
Padster
BTW incase you were wondering my friend got a new (2nd hand but hardly used) lathe that was the same size so problem removed rather than solved!
HTH
Padster
Richard_C
Established Member
I thought I had posted this ages ago, but it must have got stuck in the U bend of internet eternity. Here we go again.
Record sell the SC3 as a kit with jaws and other things but they used to sell it 'bare'. Maybe you can find one for not too much money if anyone has leftovers in stock, and keep your exisiting jaws - might make sense compared with getting a local engineering shop to make an adapter.
You could try the 'wanted' forum and the 'for sale' forums below, if you are really lucky you might find someone with the equal and opposite problem. If it was the other way around and you wanted to sell a M33 SC3 I would happily buy it to keep coles jaws on, so there might be takers for the 1" thread one you have.
Record sell the SC3 as a kit with jaws and other things but they used to sell it 'bare'. Maybe you can find one for not too much money if anyone has leftovers in stock, and keep your exisiting jaws - might make sense compared with getting a local engineering shop to make an adapter.
You could try the 'wanted' forum and the 'for sale' forums below, if you are really lucky you might find someone with the equal and opposite problem. If it was the other way around and you wanted to sell a M33 SC3 I would happily buy it to keep coles jaws on, so there might be takers for the 1" thread one you have.
Xerxes
Member
No it's a 1"x10tpi thread
Similar threads
