Saw making, our way - pic heavy

[Klaus Kretschmar]

Hi folks,

after having planned this a few years ago, Pedder and I finally brought ourselves to make some blog entries to share our saw making step by step. The first 3 entries show just the handle making more or less. The next will be done by Pedder to show the making of the blade and of the oval spine. That's the progress so far:

Part 1: http://two-lawyers-toolworks.blogspot.d ... r-way.html

Part 2: http://two-lawyers-toolworks.blogspot.d ... rt-ii.html

Part 3: http://two-lawyers-toolworks.blogspot.d ... t-iii.html

As mentioned it will be continued.

Klaus

 

[Kalimna]

Fantastic - thank you for giving us an insight into your saw making with such an informative set of articles. I am eagerly awaiting the next section.
What wonderful tools

Cheers,
Adam S

 

[deema]

Wonderful work. Thanks for sharing

 

[RossJarvis]

Thankyou

Impressive work and very informative.

 

[AndyT]

Thanks from me too. Another informative blog subscribed to!

 

[dazzer]

Cheers Klaus I have a few projects to get out of the way and then I'm going to start to make a few saws.

I was just researching and noticed your post

Thanks again for taking the time to document how you go about making your saws!

Dave

 

[GLFaria]

Thank you very much, Klaus. This is splendid teatching.

And it goes to show clearly why fine saw making is not for everyone, alas!

 

[condeesteso]

Brilliant Klaus and Pedder, very kind to take all that time to show and share your techniques. Looks to me like one of those ebony handles has a 'D' on it... probably just my imagination.

 

[Klaus Kretschmar]

Brilliant Klaus and Pedder, very kind to take all that time to show and share your techniques. Looks to me like one of those ebony handles has a 'D' on it... probably just my imagination.

Hi Douglas,

actually these handles are for saws that have been ordered longer time ago. After these will be finished, the next batch of 3 or 4 will be done immediately. There will definitely be one marked with a "D"

Klaus

 

[Harbo]

Thanks for posting - I've made a few handles but one day I'll get around to making a blade?

Rod