A antifoul2020 Established Member Joined 5 Aug 2021 Messages 90 Reaction score 19 Location Scotland 27 Oct 2024 #1 Any of you gents make sand casting flasks
The_Yellow_Ardvark Established Member Joined 22 May 2020 Messages 664 Reaction score 2,237 Location SW UK 28 Oct 2024 #2 I do. Plywood sides, pallet off cuts for the rest. Well covered in Linseed oil, good green sands. Best I did was home cast a steel hammer.
I do. Plywood sides, pallet off cuts for the rest. Well covered in Linseed oil, good green sands. Best I did was home cast a steel hammer.
A antifoul2020 Established Member Joined 5 Aug 2021 Messages 90 Reaction score 19 Location Scotland 29 Oct 2024 #3 Do you possibly have measurements And is it boiled linseed or just linseed Kind regard's
The_Yellow_Ardvark Established Member Joined 22 May 2020 Messages 664 Reaction score 2,237 Location SW UK 29 Oct 2024 #4 The box size needs to be 50% bigger than the item being cast. 25% from all extremes of the pattern. Only oil will do. I use linseed as I can get it cheep.
The box size needs to be 50% bigger than the item being cast. 25% from all extremes of the pattern. Only oil will do. I use linseed as I can get it cheep.