Reliable diy drill depth stop

[Yojevol]

My usual method of depth indication is a piece of sticky tape wrapped around the drill bit, however today it failed me on some delicate work. So I came up with this:-

simple and very effective.

Brian

 

[Peter Sefton]

I often use a bit of tape for a quick flag stop but this is far more reliable and accurate thanks for sharing @Yojevol.

I did something similar as a stop block in this article from a few years ago.

https://www.peterseftonfurnituresch...wareshelfsupportsknockdownfittingsarticle.pdf