• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Sold Record bandsaw base

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yours for the P&P if it's any use. The base of a RSBS 14. 23" x 20" x 14". I have the door.
Hi Phil
I have a BS350...and would much rather have a closed base (partly because one strut is bent and partly because dust). I can't tell if it would fit though? Any chance of the hole spacing measurements? If they work I'd like to say yes please!
 
I can't tell if it would fit though? Any chance of the hole spacing measurements
Cant you just drill holes to suit ?
Its mild steel so easy to drill, or even enlarge the holes and use a couple of washers

Alternatively use the holes on it to fit a piece of 18mm mdf/ply and use coachscrews to attach the bandsaw to that.(or double up the mdf/ply to 36mm for the screws to get a better grip.)

Im confident you can adapt it to make it work.
 

Latest posts

Back
Top