Post a photo of the last thing you made

[devonwoody]

Looks superb and back to tradition as well. I don't know the species but I'm sure others do.

 

[aramco]

this is my contribution a table made out of scrap wood and with a pallet wood top

take care
John

 

[Garno]

practice joint, from custards instructions on how to cut a mitred dovetail joint

I don't suppose you have a link to the instructions by any chance do you?

It looks amazing and would do boxes a terrific justice.

 

[thetyreman]

practice joint, from custards instructions on how to cut a mitred dovetail joint

I don't suppose you have a link to the instructions by any chance do you?

It looks amazing and would do boxes a terrific justice.

thankyou, the original thread by custard is here: how-to-cut-mitred-or-mitre-dovetails-wip-t112467.html

 

[Garno]

Thank you ever so much.

I will read it a few times then give it a try 8)

 

[Chris152]

Bad maths.

This was supposed to be just a trial but as it went on and took more effort, I wanted it to work out. All seemed ok til I got to the final hole and realised the knot was going to have to be at the front, which was never the idea. :roll:

 

[Moonsafari69]

Egg Cupboard
Made from 10mm Oak and finished with Boiled Linseed Oil. Small handle turned from Walnut. Front mesh is stainless steel. Small Neodymium magnets used for the clasp.
Box joints for the main case
Rabbet's for the rear panel
Stopped dado's for the shelves
Mitre's for the front panel

 

[Roland]

Coincidence. This afternoon I made a prototype egg rack.

Just ordinary pine, with copper pipe. It’s also a trial of Monocoat as a finish.

 

[Boysie]

My wife was looking over my shoulder.
Now I have to add an egg cupboard to the list of projects.
:roll: :wink:

 

[Doingupthehouse]

Egg Cupboard
Made from 10mm Oak and finished with Boiled Linseed Oil. Small handle turned from Walnut. Front mesh is stainless steel. Small Neodymium magnets used for the clasp.
Box joints for the main case
Rabbet's for the rear panel
Stopped dado's for the shelves
Mitre's for the front panel

An idea I’ll definitely be stealing thanks for sharing.

Simon

 

[Moonsafari69]

You’re welcome chaps. Not unsurprisingly this was requested by my wife too. They are quite efficient at keeping us busy

 

[Steliz]

Nice egg cupboard, I like it but my wife also saw it and asked why it needed a door?

 

[novocaine]

It's hardly fine furniture, but it has a charm of it's own and no, I don't have any issues jointing boards. birthday present for the young lad.

2018-08-01_09-22-06 by David Rees, on Flickr

 

[sammy.se]

Egg Cupboard
Made from 10mm Oak and finished with Boiled Linseed Oil. Small handle turned from Walnut. Front mesh is stainless steel. Small Neodymium magnets used for the clasp.
Box joints for the main case
Rabbet's for the rear panel
Stopped dado's for the shelves
Mitre's for the front panel

An idea I’ll definitely be stealing thanks for sharing.

Simon

We just keep our eggs in a basket... Not all of them, some packs are in a kitchen cupboard.

Am I missing something not having an egg cupboard??

Sent from my Nexus 5X using Tapatalk

 

[Phil Pascoe]

I have a very good egg cupboard. A fridge.

 

[sammy.se]

I have a very good egg cupboard. A fridge.

Ha!

Sent from my Nexus 5X using Tapatalk

 

[Moonsafari69]

You will all need to ask your wives / better halves about their egg cupboard requirements. Us guys just won’t get it, yet have to make them nonetheless

 

[DennisCA]

I carved an axe handle

And made a pizza peel:

 

[Paul200]

And made a pizza peel:

Pizza peel is great (and been added to my 'to do' list) - but pineapple? On a Pizza! :shock: :roll:

 

[Paul200]

My latest attempt at a jewellery box - in Yew and Steamed Pear.

Cheers

Paul