Phil Pascoe
Established Member
:idea: It would be an interesting project to make a pair of matching templets, one to cut the keys, one to cut the recesses ... :?
Post a photo of the last thing you made
- Thread starter DTR
- Start date
Help Support UKworkshop.co.uk:
monkeybiter
Established Member
phil.p":1vy40u1t said:
Norm did this using one template and two different guide bushes to give the different sizes. There is an acrylic template available [Rockler?] from the U.S. of T., the prices are amusing for a mass produced piece of plastic. Perhaps you have identified a niche [albeit limited].
http://www.ebay.co.uk/sch/i.html?_o....TRS0&_nkw=router+Template+butterfly&_sacat=0
Phil Pascoe
Established Member
I must admit as I thought it, I thought I would be surprised if it hadn't already been done. I think maybe If I were to attempt it I would look to do a more irregular shape.
Mr T
Established Member
I don't take on many commisions nowadays, too busy teaching, but I do some work for long standing customers. One is a puzzle maker who i make bioxes for. One of the many other strings to his bow is professional bridge teacher. He asked me to make this bidding board for a project he has teaching bridge to children. The box is walnut, the maple grid is for placing bids (in bridge you bid to say how many tricks you will win, bidding is also a coded way of telling your partner what you have in your hand) when the bidding is complete the grid is covered with boards lined with green baize. The reverse of the board is decorated with the four suites inlayed in black and red. The board folds up and the other boards fit inside.
The corners are mitred and reinforced with 4mm dominos. The 10mm maple grid is mitred and fitted in 3mm deep grooves in the board. The hinges are Brusso. I have to say that even thoiught they are expensive they do save a lot of fitting time. An 8mm bit on the router table and they are fitted in about half an hour.
Whilst working on this last week I decided to make a couple of boxes for the children of Palistinian friends living on the occupied west bank. The box is yew with a masur birch veneered lid inlaid with the Palistinian flag. To save hinging I made it with a tilting lid. The corners were just mitred then reinforced with biscuits.
The corners are mitred and reinforced with 4mm dominos. The 10mm maple grid is mitred and fitted in 3mm deep grooves in the board. The hinges are Brusso. I have to say that even thoiught they are expensive they do save a lot of fitting time. An 8mm bit on the router table and they are fitted in about half an hour.
Whilst working on this last week I decided to make a couple of boxes for the children of Palistinian friends living on the occupied west bank. The box is yew with a masur birch veneered lid inlaid with the Palistinian flag. To save hinging I made it with a tilting lid. The corners were just mitred then reinforced with biscuits.
Attachments
will1983":29lpiosj said:
Sorry Will, I forgot to answer you earlier.
I bought them from a trader on eBay. Here's the link:-
http://www.ebay.co.uk/itm/G4-Pleated-Pa ... jBL9uurBNg
MarkDennehy
Established Member
Made a wristrest for an officemate after a challenge. 30 minutes work from a rough-sawn offcut with hand tools (would have been less time but I was foostering around with my new Knew Concepts fretsaw).
Total cost, €2 for wood and felt (there's some underneath so it doesn't slide on the office tabletop) and glue and finishes (roughly). Utterly unremarkable and I wouldn't remark on it except for this bit:
The challenge was that I couldn't make it quickly and cheaply, because he was looking at this one on Massdrop
Same size exactly, I think that's walnut as well, but they wanted $95 for it.
(I nearly choked on my coffee when he showed me the pricetag).
I mean... once you joint and plane the rough-sawn timber, that's two tablesaw cuts, two mitre saw cuts and a minute on a router table for each one. It'd cost them less than it cost me. What the hell is the profit margin on these things? :shock:
Total cost, €2 for wood and felt (there's some underneath so it doesn't slide on the office tabletop) and glue and finishes (roughly). Utterly unremarkable and I wouldn't remark on it except for this bit:
The challenge was that I couldn't make it quickly and cheaply, because he was looking at this one on Massdrop
Same size exactly, I think that's walnut as well, but they wanted $95 for it.
(I nearly choked on my coffee when he showed me the pricetag).
I mean... once you joint and plane the rough-sawn timber, that's two tablesaw cuts, two mitre saw cuts and a minute on a router table for each one. It'd cost them less than it cost me. What the hell is the profit margin on these things? :shock:
thetyreman
Established Member
have been making an outdoor bench using hounds tooth dovetails using the green coloured 'treated' timber, it still needs another couple of layers of tung oil yet before it's complete.
Attachments
Some wooden flowers I've turned and carved for the mother in law for mother's day.
monkeybiter
Established Member
thetyreman":25rk4cp8 said:
Fancy looking dovetails thetyreman, but I think you ought to put some sort of bracing under the corners or a board across from leg to leg oriented vertically to prevent racking,
it would be a shame after going to so much effort to see your creation fold up and do someone an injury.
woodbrains
Established Member
Hello,
Very nice boxes, Chris, well done!
Mike.
Very nice boxes, Chris, well done!
Mike.
custard
Established Member
DTR":1g3xyfb3 said:Some brackets for a towel rail
You've done well there Dave. I know how difficult it is to have superficially simple looking components, but actually produce them with real precision and accuracy. It's far from easy to deliver really excellent work like that!
=D>
custard
Established Member
thetyreman":1idy3fxb said:
You're doing brilliantly Tyre Man, working through a structured series of projects with real discipline and commitment. I really admire the way you don't allow yourself to get distracted by all the woodworking trivia that prevents progress. You just keep beavering away, tucking more and more woodworking skills under your belt.
=D>
Dan j
Established Member
n0legs":3kymrws9 said:Finished this little table, not bad seeing as I started it in 2015 :roll:
Made of hemlock, douglas fir and an unknown hardwood. All done with hand tools for a change, well except for the sanding :lol:
I call it the "Leftovers table".
Looks good. Like the idea of a "leftovers" project.
SkinnyB
Established Member
cowfoot
Established Member
Finished a bedside table, first thing I've made that I designed myself.
Ash, Elm & painted ply.
Stuff that I learned -
Some joints are easier to cut by hand rather than insisting on using a Domino.
A shooting board is my new favourite item in the workshop...
Closely followed by a card scraper.
I need to check and double check for square during glue up - might make fitting drawers easier!
Anyway, I enjoyed it. Can't wait to start the next one and iron out those mistakes.
Ash, Elm & painted ply.
Stuff that I learned -
Some joints are easier to cut by hand rather than insisting on using a Domino.
A shooting board is my new favourite item in the workshop...
Closely followed by a card scraper.
I need to check and double check for square during glue up - might make fitting drawers easier!
Anyway, I enjoyed it. Can't wait to start the next one and iron out those mistakes.
Attachments
DiscoStu
Established Member
I like that a lot although not keen on the blue panel?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
