Hi folks , I have been asked to make a stand to hang a pocket watch from , is this something anyone has seen before & where could I get a design / drawing for one , thanks for looking, T
pocket watch stand
- Thread starter tony
- Start date
Help Support UKworkshop.co.uk:
Happy amateur
Established Member
Have a look on e bay for pocket watch stand and you will find lots of designs
Fred
Fred
woodbrains
Established Member
Hello,
Keith Rowleys projects book has a good one in it.
Mike.
Keith Rowleys projects book has a good one in it.
Mike.
chipmunk
Established Member
This is one I made based upon Gary Rance's version made in four parts....
Two identical columns with beads top and bottom and a ring split into two to make the arch. The grain for the ring runs horizontally.
The arch is screwed onto the columns which have slightly concave tops using two headless #4 screws in central pilot holes.
The columns fit into forstner bit drilled mortices in the base.
HTH
Jon
Two identical columns with beads top and bottom and a ring split into two to make the arch. The grain for the ring runs horizontally.
The arch is screwed onto the columns which have slightly concave tops using two headless #4 screws in central pilot holes.
The columns fit into forstner bit drilled mortices in the base.
HTH
Jon
IHc1vtr+
Established Member
As it happens i have just made one, pocket watch stand and 40 year calendar. Made from reclaimed mahogany. I'm no photographer, so excuse pic. The line round inside circumference of watch recess is brass inlay, not a mistake LOL. As i said pic is rubbish.
Did something similar to IHC1vc4, but just for a watch, for Father in Law, some 45 years ago so no pics. But that was done with hand carving of the recess, if I recall correctly. The much more ornate turned versions look very impressive.
Thanks to all for replying , its given me plenty of ideas , cheers T
Similar threads
