Old Pump Restoration.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The_Yellow_Ardvark

Established Member
Joined
22 May 2020
Messages
673
Reaction score
2,259
Location
SW UK
Been sorting out some old external hard drives and I found this rebuild.

IMG_4292.JPG



Heavy. Broken. Seized, but complete.




IMG_4327.JPG


Getting it into the seperate parts was fun. Care had to be taken as replacements parts are not easy to be found.

Yes, that is an old fashion paraffing blow torch. Good heat, but gentle.

IMG_4329.JPG



Laid out.
No thread was the same, each was hand cut and would only fit into one hole. But there was pop marks on its internal thread and the place it fitted.

IMG_4341.JPG



The yellow tub is holding bits I was derusting.

IMG_4351.JPG


This lead to a few bad words. But it was an old fracture.


IMG_4352.JPG



A braze up hyad it fixed.

IMG_4372.JPG



The body showing the simple construction of the body.


IMG_4393.JPG


Laying up and marking out.


IMG_4400.JPG



Pitted, but the castings of the head was very good.



IMG_4476.JPG



Modern outlet fixings. All polished up, waxed and ready.

The internal washers were made from new old stock leather.


Fully working as well.
 
Really impressive restoration, maybe one day I might restore one I have! It is always nice when something unexpected is found on old CDs or hard drives. I recently found a CD of photos of furniture made in my workshop more than 20 years ago, that I had totally forgotten.
 
Back
Top