NU TOOL Thickness planer

[radicalwood]

HI All,
I have been given one of the above but it seems to have a 0.6mm taper across its width :? . I have removed the stainless plate from the bottom and am using the machined surface below it as the deck. have adjusted the infeed and out feed guide roller and but it still seems to taper.
anyone got a manual or suggestions.
I do have an Axminster PT but for quick bits just hate takeing the tables on and off .

 

[DaveL]

I would check that the knives are in the cutter head correctly, it sounds like one is not set correctly.

 

[bubbabear]

As above, the knives need to be perfectly parallel with the bed.

 

[radicalwood]

cheers for that I will give it a check