LUREM C210

[briany]

Hi I have bought a LUREM C210 with some missing parts and a dodgy motor (keeps tripping RCD). Does anyone have the manual for this which can be made available to me in electronic form (I'm in Perth, Western Australia). I read where Andy 38 and Toolsntat had an exchange on this machine so maybe can help.

Thanks
Brian

 

[Myfordman]

Try here. http://passion-usinages.forumgratuit.or ... 00-210-260
mostly in French but translation tool online should help if needed.

MM

 

[toolsntat]

I have a full reprint of the manual Brian.
Off out now but will try and help as best I can later 8)

Andy

 

[briany]

Thanks to Myfordman and toolsntat for assistance. Looking forward to toolsntat manual of LUREM C210. Not website familiar/competemt so unsure how directly reply.

Brian

 

[Myfordman]

Brian, one more post to the forum and you will be allowed to use the private message system if you need personal contact direct to a member.

If Andy is busy you can get the manuals from the link I provided.

MM

 

[toolsntat]

Brian, one more post to the forum and you will be allowed to use the private message system if you need personal contact direct to a member.

If Andy is busy you can get the manuals from the link I provided.

MM

Yes the Manual I have is the same as MM has linked to Brian :wink:

Andy

 

[briany]

OK! Great thanks. Two decades ago I had a single phase Robland 210 then a 3 phase 310. And a shed. Used Jarrah and Blackbutt timbers mainly. Moved rural to city so sold them at considerable loss in terms of enjoyment. Where I am now is too small for bigger machines so I am seeing if this small French unit will be a viable option in the city. Anyway, I have access to lots of good advice so will see how things go.

Regards, Brian

 

[dickm]

As the very happy owner of a C200, which was the daddy (or was it grandaddy?) of the C210, I reckon they are very underrated machines. Not quite up with the Startrite/Robland, but very satisfactory for a smallish workshop in terms of their capacity per unit "footprint".
Enjoy.

 

[OrangeFive]

What are people’s thoughts on the Lurem C.210b?

 

[Misterdog]

Lurem C.210b

This .


I have a Lurem T45, a dedicated spindle moulder which is excellent.

 

[OrangeFive]

Great video thanks. But has anyone used one ?
Thanks for the reply

 

[toolsntat]

Great video thanks. But has anyone used one ?
Thanks for the reply

Yes, I use one and when set up properly it is a dream to use.
The only drawback being swapping over belts to suit function.
Cheers Andy