low angle smoother

[clive griffiths]

I am thinking of buying a low angle smoothing plane,does anyone on here use one ?

Clive..

 

[RobNichols]

I have the Melbourne low angle smoothing plane which I bought from Wood Workers Workshop. I'm very pleased with it. It is definitely a good end grain solution.

Having said that, for plain old smoothing I prefer my standard pattern bailey 3 and 4 both of which can be picked up cheaply second hand.

 

[johnnyb]

If your used to normal planes they are unwieldy. As a special addition plane maybe as a first no way. They work as low angle end grain dressers. But have limits when used long grain.

 

[clive griffiths]

Thank you both for the advice ,I had thought about selling my lie-nielsen jack plane to purchase one , have to think again.

 

[RobNichols]

Thank you both for the advice ,I had thought about selling my lie-nielsen jack plane to purchase one , have to think again.

That makes sense. A jack plane is hugely versatile. If you only have one plane that's the one to have.

 

[Peter Sefton]

In my experience the majority of new woodworkers go with standard bench planes, usually because they have some experience of them but a Low Angle plane is far less complicated with fewer parts to set up and very versatile once the effective pitch is understood. About 30% of my students went with Low Angle and never looked back.

This video is on the Low Angle Jack with an overview of the most common plane angles. My explanation of the pitch for each timber is a generic overview.



Cheers

Peter