Nothing like a 750 tripple stroker.Always wanted a 400 four
Nothing like a 750 tripple stroker.Always wanted a 400 four
People say "Not powerful enough" now, but I don't know, at the time it seemed OK. A relatively nimble bike as well. I really liked mine.Always wanted a 400 four, a mate had one and it was a really nice bike, and that exhaust ! A work of art in itself.
Used to have an RD250, pretty fast. But the RD500, now there was a beast. Only 80hp out of the box, but weighed about as much as a tea tray went like the proverbial stabbed ratNothing like a 750 tripple stroker.
Had a few rides on my mates and loved it. Ran like a sewing machine, brakes and lights that worked, electric start and didn't leak oil everywhere. Handled well too. Like a spaceship compared to most of the stuff from the British makers at the time. Loved bikes like the Bonneville, but let's face it and antiquated piece of junk by comparison.People say "Not powerful enough" now, but I don't know, at the time it seemed OK. A relatively nimble bike as well. I really liked mine.
That's the thing with them. As long as you keep up with the oil changes and general maintenance (same with anything) they're dead reliable, and no trouble.Had a few rides on my mates and loved it. Ran like a sewing machine, brakes and lights that worked, electric start and didn't leak oil everywhere. Handled well too. Like a spaceship compared to most of the stuff from the British makers at the time. Loved bikes like the Bonneville, but let's face it and antiquated piece of junk by comparison.
Now that was an engine! At idle it sounded like most bikes at full revs.Or in racing engines the famous 1960's Honda straight six 250, an amazing piece of engineering.
Honda had a 50th anniversary at the IOM.Now that was an engine! At idle it sounded like most bikes at full revs.
I was similarly fortunate in hearing it up close and personal. Many years ago I worked in engine analysis tool development and was fortunate enough to work with Honda at the TT on a few different occasions. As the apprentice I was a bit of a hanger on but my mentor at the time used to knock up special tools like timing strobes with very fast response to work on the racing engines. Towards the end of that era though I also did a few track days with the race team which was fantastic.Honda had a 50th anniversary at the IOM.
I'd dropped my RC30 and broke the clutch lever.
Someone suggested I go down to the Honda pits and see if they had one.
They didn't (got one eventually from IOM Honda) but what they did have at the pits was all the top brass down to see the bikes they'd brought being checked.
The 250 six was wheeled out and started.
Oh my God. What a noise. Unbelievably loud. I've never been sat next to a machine gun but I imagine it must be similar.
I had to back off it was so loud.
It does sound amazing but ear plugs are not optional at less than 100 yards.
Speaking of high revving yet reliable engines, the CBR250RR revved to 18,000 rpm.
I always fancied one.
Wankel? Gas Turbine?
All right, I know, both tried and failed