Hand sanding, using 6" circular discs?
- Thread starter pe2dave
- Start date
Help Support UKworkshop.co.uk:
pe2dave
Established Member
As earlier, (except I missed it). Thanks.
My Festool block is for 6" discs, as I have the Rotex 150mm
https://www.festool.co.uk/products/...s-and-abrasives/495965---hsk-d-150-w#Overview
Err, 150mm = 6" in my book. Other sizes are available.
pe2dave
Established Member
Sorry, another 'wrap around'.
pe2dave, I have used a velcro pad as posted by Essex Workshop for many years, so much so it has started to "crumble". Can't beat it highly receomended, mine is the 150mm version.
Jacob
What goes around comes around.
Not sure why you'd need a velcro pad at all. Hand held around a block is fine. 6" disc just right for a 4x2" cork or wood block.
Simple, because the post bype2dave was whether anyone had experience of using a velcro block for circular discs. I doubt there is a woodworker who hasn't used a wood or cork block but that wasn't the question. The velcro block is very light and the abrasive does not creep along a wood block. Another plus is that you can use it on its side for narrow work surfaces again without having to grip the abrasive.
Jacob
What goes around comes around.
Nope. Didn't mention velcro at all!
Dave, is this a play on words, or am I missing something here? A wrap around? Chris
pe2dave
Established Member
Oblong block, circular sandpaper. Edge 1/3 wraps around the edges of the block, which also have velcro hooks. Hence 'wrap around'... OK, not all around ;-)
